Still no 4 & 5 cylinder support ?

[Boost]

I dowloaded the latest version of the EFILive software, and after manually installing the Vortec calibration files into the L31 folder I created, I can finally open some previously "Unrecognised PCM" files. (I have been having a lot of trouble with the older Vortecs, 4.3s & 5.7s).
However when I tried to open a 2.2 liter and a 3.5 liter file, it's still "Unrecognised". Is there something or will there be something soon I can download to make these work? Those engines are supposed to be supported, according to the list. Thanks!

[GMPX]

If you can send me the tun files you read out, I am sending out 'limited' cal files, enough to get you going (main fuel, spark etc). This will be the situation until we can get back and reconfigure the P12 files we pretty much had completed a while back.

Cheers,
Ross

[Biggsy]

If you can send me the tun files you read out, I am sending out 'limited' cal files, enough to get you going (main fuel, spark etc). This will be the situation until we can get back and reconfigure the P12 files we pretty much had completed a while back.

Cheers,
Ross

Got any 'limited' cal files for the Alloytec V6?


Hijacking the thread (sorry)

[limited cv8r]

I'll second that.

[GMPX]

Alloytec V6 , why, the local sales rep needs 1 or 2 more KW's?
Not going to happen, I am so over Bosch ECM's.

Cheers,
Ross

[limited cv8r]

c'mon, one for us aussies,

[Boost]

Thanks, I actually already sent the 2.2 liter S10 file to support a while ago, but I don't mind sending it again. As far as the P12 is concerned, I'd rather wait for full support if it's not too far away.

[Biggsy]

When the techs from the Formula Holden class first got to play with these engines, they could extract near on 300kw out of them without ANY internal modifications (using the 190 Aloytec motor as a base) . That is a HUGE increase.

I would also like to play with the abuse management (get rid of it).

There are a LOT of people that would like their Commodore V6's modified, I get more people asking me about modifying their V6's than V8's.

Looking at the list of supported vehicles on the EFILIVE main site, there are HEAPS of Chevy, GMC etc V6's even 4cyl supported, why not throw some of that support towards the Aussie V6's?

[Boost]

No, support all the US models first!

LOL

[Boost]

Ok, here are the 2 that I need. One is a 2.2 S10 and the other is a 3.5 Colorado. I will also send these to support. Thanks!

(un-hijacks thread)