Would this be a good idea to have them all in one spot? Like a streetrod engine set up or, a lean cruise auto setup ect...? I can make some cool ones to start it all off.
Would this be a good idea to have them all in one spot? Like a streetrod engine set up or, a lean cruise auto setup ect...? I can make some cool ones to start it all off.
"If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."
How about a how to for the sticky's Jesse , I havent even attempted to use this function yet - I should do but have got stuck in my ways
While we are on how to's I think there needs to be one on creating custom charts/pids/dashboards - I know I normally stuff it up te first coupleoff attempts - maybe even share some themes that newbys could download
Here's one for the dashboards.
http://efilive.com/forum/viewtopic.php?t=1664
Paul
Check your Email and you LS1tech PM please. I've been trying to get a response from you for 4 days now.
Was that request directed at Wait4Me, Delco or Blacky?Originally Posted by Qpred98
I have checked my pm's and email but no messages are there.
If you want to contact me (Blacky) then just pm me on this forum.
Regards
Paul
It was for me I emailed him,
"If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."
Was looking for some other dashboards and ran across this link. It doesnt seem to work. Any ideas, or is it going to another link now?Originally Posted by Blacky
'00 Pewter TA WS6 12.6@111 on street tires 1.87 60'
PERFORMANCE: BG Ram Air, Lid, K&N, MSD 8.5 wires, NGK TR55's, 160*
SUSPENSION: BMR-STB/SFC/PHR, UMI LCA's
DRIVETRAIN: rebuilt 4L60E. 3000TCI, Hayden Trans Cooler, Yukon 3.73's, TA girdle
TUNING: EFILive
No runs after engine upgrade
Newest mods:LS6-intake/heads/ported oil pump, 28lb injectors, Comps-918's, Comps 224/230 .581/.592 114 cam, Dynatech LT's, Rollmaster chain.
Sounds like a winner to me. I'd like to see some scripts
That is the link on the old forum. Try this:Originally Posted by ws6togo
http://www.efilive.com/doc/Tutorials...20Tutorial.pdf
Bill
2011 Camaro 2SS/RS L99 RJT
CAI, Inc. Cold Air Induction;ADM Scoop
Rx Catch Can;Rx Breather;Roto-Fab Washer Container
VMax Ported RJT Throttle Body
XSPower Headers and XSPower 3" Exhaust System
Elite Engineering Tunnel Brace,
Gorilla Wheel Lock System;
Tinted Windows 35%;EFILive Tune
thanks bowling SS
'00 Pewter TA WS6 12.6@111 on street tires 1.87 60'
PERFORMANCE: BG Ram Air, Lid, K&N, MSD 8.5 wires, NGK TR55's, 160*
SUSPENSION: BMR-STB/SFC/PHR, UMI LCA's
DRIVETRAIN: rebuilt 4L60E. 3000TCI, Hayden Trans Cooler, Yukon 3.73's, TA girdle
TUNING: EFILive
No runs after engine upgrade
Newest mods:LS6-intake/heads/ported oil pump, 28lb injectors, Comps-918's, Comps 224/230 .581/.592 114 cam, Dynatech LT's, Rollmaster chain.