Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Should we make a sticky and post in our "custom scripts

  1. #1
    EFILive Reseller wait4me's Avatar
    Join Date
    Aug 2004
    Posts
    1,342

    Default Should we make a sticky and post in our "custom scripts

    Would this be a good idea to have them all in one spot? Like a streetrod engine set up or, a lean cruise auto setup ect...? I can make some cool ones to start it all off.
    "If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."

  2. #2
    Lifetime Member
    Join Date
    Apr 2003
    Posts
    379

    Default

    How about a how to for the sticky's Jesse , I havent even attempted to use this function yet - I should do but have got stuck in my ways

    While we are on how to's I think there needs to be one on creating custom charts/pids/dashboards - I know I normally stuff it up te first coupleoff attempts - maybe even share some themes that newbys could download

  3. #3
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,123

    Default

    Here's one for the dashboards.
    http://efilive.com/forum/viewtopic.php?t=1664

    Paul

  4. #4
    Junior Member
    Join Date
    Jun 2005
    Posts
    19

    Default Jes

    Check your Email and you LS1tech PM please. I've been trying to get a response from you for 4 days now.

  5. #5
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,123

    Default Re: Jes

    Quote Originally Posted by Qpred98
    Check your Email and you LS1tech PM please. I've been trying to get a response from you for 4 days now.
    Was that request directed at Wait4Me, Delco or Blacky?

    I have checked my pm's and email but no messages are there.
    If you want to contact me (Blacky) then just pm me on this forum.

    Regards
    Paul

  6. #6
    EFILive Reseller wait4me's Avatar
    Join Date
    Aug 2004
    Posts
    1,342

    Default

    It was for me I emailed him,
    "If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."

  7. #7
    Junior Member ws6togo's Avatar
    Join Date
    Mar 2005
    Posts
    41

    Default Link not working

    Quote Originally Posted by Blacky
    Here's one for the dashboards.
    http://efilive.com/forum/viewtopic.php?t=1664

    Paul
    Was looking for some other dashboards and ran across this link. It doesnt seem to work. Any ideas, or is it going to another link now?
    '00 Pewter TA WS6 12.6@111 on street tires 1.87 60'
    PERFORMANCE: BG Ram Air, Lid, K&N, MSD 8.5 wires, NGK TR55's, 160*
    SUSPENSION: BMR-STB/SFC/PHR, UMI LCA's
    DRIVETRAIN: rebuilt 4L60E. 3000TCI, Hayden Trans Cooler, Yukon 3.73's, TA girdle
    TUNING: EFILive
    No runs after engine upgrade
    Newest mods:LS6-intake/heads/ported oil pump, 28lb injectors, Comps-918's, Comps 224/230 .581/.592 114 cam, Dynatech LT's, Rollmaster chain.

  8. #8

  9. #9
    Lifetime Member BowlingSS's Avatar
    Join Date
    Nov 2003
    Posts
    604

    Cool

    Quote Originally Posted by ws6togo
    Was looking for some other dashboards and ran across this link. It doesnt seem to work. Any ideas, or is it going to another link now?
    That is the link on the old forum. Try this:
    http://www.efilive.com/doc/Tutorials...20Tutorial.pdf

    Bill
    2011 Camaro 2SS/RS L99 RJT
    CAI, Inc. Cold Air Induction;ADM Scoop
    Rx Catch Can;Rx Breather;Roto-Fab Washer Container
    VMax Ported RJT Throttle Body
    XSPower Headers and XSPower 3" Exhaust System
    Elite Engineering Tunnel Brace,
    Gorilla Wheel Lock System;
    Tinted Windows 35%;EFILive Tune

  10. #10
    Junior Member ws6togo's Avatar
    Join Date
    Mar 2005
    Posts
    41

    Default

    thanks bowling SS
    '00 Pewter TA WS6 12.6@111 on street tires 1.87 60'
    PERFORMANCE: BG Ram Air, Lid, K&N, MSD 8.5 wires, NGK TR55's, 160*
    SUSPENSION: BMR-STB/SFC/PHR, UMI LCA's
    DRIVETRAIN: rebuilt 4L60E. 3000TCI, Hayden Trans Cooler, Yukon 3.73's, TA girdle
    TUNING: EFILive
    No runs after engine upgrade
    Newest mods:LS6-intake/heads/ported oil pump, 28lb injectors, Comps-918's, Comps 224/230 .581/.592 114 cam, Dynatech LT's, Rollmaster chain.

Page 1 of 2 12 LastLast

Similar Threads

  1. Post your "Splash Screen" images
    By Blacky in forum FlashScan V2 BB Logging
    Replies: 59
    Last Post: September 7th, 2016, 04:28 PM
  2. custom pid for GM.ENGOILP ...inside... sticky info
    By WHYTRYZ06 in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: December 15th, 2009, 04:57 PM
  3. Replies: 0
    Last Post: October 8th, 2008, 12:01 AM
  4. How do you make a custom PID???
    By WiseGuyZ06 in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: October 10th, 2007, 10:20 AM
  5. Make a "LED" display on a dashboard gauge
    By emarkay in forum Tips and tricks
    Replies: 3
    Last Post: September 4th, 2003, 06:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •