Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: shift point adjustment not working anymore

  1. #1
    Senior Member
    Join Date
    Jun 2006
    Posts
    144

    Default shift point adjustment not working anymore

    Can we get this fixed in a software release? When you try to adjust by X percent it comes back and ask if you'd like to modify your tables by 0 percent and makes no change.

  2. #2
    Lifetime Member jfpilla's Avatar
    Join Date
    Apr 2003
    Posts
    666

    Default

    Quote Originally Posted by Alvin
    Can we get this fixed in a software release? When you try to adjust by X percent it comes back and ask if you'd like to modify your tables by 0 percent and makes no change.
    http://forum.efilive.com/showthread....2993#post52993

    2003 red vert
    Mods:
    LS7 crate engine, wet sump, 24xx reluctor
    LPE 100mm MAF
    Vararam, cold air intake and bridge
    RPM Level 6/4L60e trans
    3.42 gears
    Yank SS3600
    1-7/8" AR headers
    Z06 exhaust
    470rwhp 437rwtq
    1/8th mi-1.526-60'-6.862-1/8th-@100.74mph

  3. #3
    Lifetime Member jfpilla's Avatar
    Join Date
    Apr 2003
    Posts
    666

    Default

    Alvin,
    I could not get anyone to try the calculator and confirm that it didn't work. Your post popped up when I had given up and I found it oddly funny.
    Joe
    2003 red vert
    Mods:
    LS7 crate engine, wet sump, 24xx reluctor
    LPE 100mm MAF
    Vararam, cold air intake and bridge
    RPM Level 6/4L60e trans
    3.42 gears
    Yank SS3600
    1-7/8" AR headers
    Z06 exhaust
    470rwhp 437rwtq
    1/8th mi-1.526-60'-6.862-1/8th-@100.74mph

  4. #4
    Senior Member
    Join Date
    Jun 2006
    Posts
    144

    Default

    Hopefully they will fix it.. I have to reinstall old software when I want it to work.

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I have tried it on my F-body tune files and it gives me a non-zero correction...

    Are you both doing this on C5 tune files (transaxle box checked)...?

    I pm'd Paul.

  6. #6
    Lifetime Member jfpilla's Avatar
    Join Date
    Apr 2003
    Posts
    666

    Default

    Quote Originally Posted by joecar
    I have tried it on my F-body tune files and it gives me a non-zero correction...

    Are you both doing this on C5 tune files (transaxle box checked)...?

    I pm'd Paul.
    Yes, C5 with box checked. You are probably putting in tire size and getting an adjustment for tire size change.
    2003 red vert
    Mods:
    LS7 crate engine, wet sump, 24xx reluctor
    LPE 100mm MAF
    Vararam, cold air intake and bridge
    RPM Level 6/4L60e trans
    3.42 gears
    Yank SS3600
    1-7/8" AR headers
    Z06 exhaust
    470rwhp 437rwtq
    1/8th mi-1.526-60'-6.862-1/8th-@100.74mph

  7. #7
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    No, I left tire size as is and I only changed the gear ratio...

    I also repeated this with Transaxle checked, and it computed a correction of something like 222% to go from 3.23 to 4.11...
    that doesn't look right to me...

  8. #8
    Lifetime Member jfpilla's Avatar
    Join Date
    Apr 2003
    Posts
    666

    Default

    Quote Originally Posted by joecar
    No, I left tire size as is and I only changed the gear ratio...

    I also repeated this with Transaxle checked, and it computed a correction of something like 222% to go from 3.23 to 4.11...
    that doesn't look right to me...
    Joe,
    It probably has to do with checking the box since your car is not a C5. When I uncheck the box I get a crazy number. -.70xxxxxxxxxx
    Thanks for trying.
    Joe
    2003 red vert
    Mods:
    LS7 crate engine, wet sump, 24xx reluctor
    LPE 100mm MAF
    Vararam, cold air intake and bridge
    RPM Level 6/4L60e trans
    3.42 gears
    Yank SS3600
    1-7/8" AR headers
    Z06 exhaust
    470rwhp 437rwtq
    1/8th mi-1.526-60'-6.862-1/8th-@100.74mph

  9. #9
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I'll play around with some C5 tune files.

  10. #10
    Lifetime Member jfpilla's Avatar
    Join Date
    Apr 2003
    Posts
    666

    Default

    Quote Originally Posted by joecar
    I'll play around with some C5 tune files.
    I tried a 2002 Camaro file, checked the box and got, 222.998014.
    Without the check it came up, -21.411675. That looks right.
    It looks like the transaxle calculator is broken. Probably why it wasn't noticed right away
    Joe
    2003 red vert
    Mods:
    LS7 crate engine, wet sump, 24xx reluctor
    LPE 100mm MAF
    Vararam, cold air intake and bridge
    RPM Level 6/4L60e trans
    3.42 gears
    Yank SS3600
    1-7/8" AR headers
    Z06 exhaust
    470rwhp 437rwtq
    1/8th mi-1.526-60'-6.862-1/8th-@100.74mph

Page 1 of 2 12 LastLast

Similar Threads

  1. O2 Switch Point Adjustment
    By swingtan in forum E37, E38 & E67 PFI ECM's
    Replies: 13
    Last Post: April 18th, 2013, 02:13 PM
  2. Need some help: Can't view Dashpage anymore
    By DrkPhx in forum General
    Replies: 3
    Last Post: November 28th, 2009, 12:23 PM
  3. trouble with shift point tuning
    By hot-dog in forum Allison 5 & 6 Speed
    Replies: 4
    Last Post: March 23rd, 2009, 09:13 AM
  4. Shift Point Adjuster not working?
    By Ninety8C5 in forum Gen III V8 Specific
    Replies: 1
    Last Post: October 16th, 2007, 02:09 PM
  5. 4L60E WOT shift point settings
    By billiardcue in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 8
    Last Post: May 2nd, 2007, 08:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •