Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Virtual VE table update?

  1. #1
    Junior Member
    Join Date
    May 2007
    Posts
    15

    Default Virtual VE table update?

    Any word on the release of the virtual VE tables update? just curious if beta testing went OK. I'm kind of antsy to try a 2 bar VEtune

    Ed

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Hi Ed, everything seems to be going fine, just a couple of little things we needed to fix up.
    We also added in locking for the E38 / E67. This will be in the Virtual VE update release so just a little bit of testing for that and it's all good to go. I'd say by the weekend it should be posted up.

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Junior Member
    Join Date
    May 2007
    Posts
    15

    Default

    Sounds good Ross!
    Here's a couple pics of the car that's been sitting on the other side of my shop laughing at me for the last couple weeks

    It's already made 625 RWHP on 6 PSI, with the MAF, but it has some driveability issues I would like to sort out
    Ed
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	resizevette.JPG 
Views:	352 
Size:	66.8 KB 
ID:	2022   Click image for larger version. 

Name:	resizevette2.JPG 
Views:	353 
Size:	58.3 KB 
ID:	2023  
    Last edited by Ed@Late Model Speed; August 21st, 2007 at 01:26 PM.

  4. #4

    Default

    Ed,

    Is that a P1-SC? Stock motor, stock manifolds?

    Howard

    www.redline-motorsports.net

    1-954-703-5560

    2006 ZO6 895/866 with APS TT
    2010 SSRS Camaro HTR-900TT (798/801)
    2011 HTR-850R Camaro
    2012 ZL1 Auto (10.33@135 MPH) Video Here!

  5. #5
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Quote Originally Posted by Ed@Late Model Speed
    Sounds good Ross!
    Here's a couple pics of the car that's been sitting on the other side of my shop laughing at me for the last couple weeks

    It's already made 625 RWHP on 6 PSI, with the MAF, but it has some driveability issues I would like to sort out
    Ed
    Making me jealous doesn't help Ed
    I no longer monitor the forum, please either post your question or create a support ticket.

  6. #6
    Junior Member
    Join Date
    May 2007
    Posts
    15

    Default

    Quote Originally Posted by GMPX
    Making me jealous doesn't help Ed

    no, really, I can literally hear it laughing at me......


    Howard, yes P1-SC-1, Kooks 1-7/8" headers, 3" x-pipe w/highflow cats
    I think it's pretty similar to yours.

    Ed

  7. #7

    Default

    Awesome.

    Numbers sound right in line.

    Here was mine on 4.0 psi.

    What kind of drivability issues are you having? Are you using 60 lb Motrons?

    How are you coolant temps?




    www.redline-motorsports.net

    1-954-703-5560

    2006 ZO6 895/866 with APS TT
    2010 SSRS Camaro HTR-900TT (798/801)
    2011 HTR-850R Camaro
    2012 ZL1 Auto (10.33@135 MPH) Video Here!

  8. #8
    Junior Member
    Join Date
    May 2007
    Posts
    15

    Default

    Nice! you're making about the same as ours with 2 lbs less boost! Good job

    yep, 60lb Motrons, coolant temps are 185-190 but I haven't driven it real hard. It does have a 160 stat. I'm real happy with everything, except, on cold start it's fine for 2-3 sec, then goes super lean (19.0-20.0:1 ) for about 30-45 seconds, no trottle response, almost dies, then it smooths out and everythings fine? This is only on startup, whether it's cold from overnight, or re-start after sitting for 5 min.
    I can drive the car normally, or get into boost at will, and it never so much as hiccups any time, but that deal on startup makes it act like an old big block with no choke!

    Any thoughts?

  9. #9

    Default

    Ed,

    I would be interested at looking your tune and we can talk "offline". I'd love to help you with this.

    Howard

    www.redline-motorsports.net

    1-954-703-5560

    2006 ZO6 895/866 with APS TT
    2010 SSRS Camaro HTR-900TT (798/801)
    2011 HTR-850R Camaro
    2012 ZL1 Auto (10.33@135 MPH) Video Here!

  10. #10
    Junior Member
    Join Date
    May 2007
    Posts
    15

    Default

    Quote Originally Posted by Redline Motorsports
    Ed,

    I would be interested at looking your tune and we can talk "offline". I'd love to help you with this.

    Howard

    I would really like that, I PM'd you my cell #
    Thanks,
    Ed

Page 1 of 2 12 LastLast

Similar Threads

  1. Virtual ve table
    By Ls1joe in forum E37, E38 & E67 PFI ECM's
    Replies: 4
    Last Post: May 14th, 2009, 10:31 PM
  2. Okay question on the virtual ve table
    By chrleb2 in forum E37, E38 & E67 PFI ECM's
    Replies: 8
    Last Post: December 21st, 2008, 08:20 AM
  3. Virtual VE table not showing up
    By XLR8NSS in forum E37, E38 & E67 PFI ECM's
    Replies: 7
    Last Post: August 25th, 2008, 12:08 PM
  4. E38/E67 ECM Speed Density Virtual VE table
    By GMPX in forum E37, E38 & E67 PFI ECM's
    Replies: 65
    Last Post: May 18th, 2008, 07:51 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •