Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Stock 2.2l 98 S-10

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Stock 2.2l 98 S-10

    Since were still waiting on calibration files, if anyone has a stock calibration from a 98 S-10 2.2l that did not have an EGR please post for me. I need to delete the EGR on one and would like to just flash the factory file from one that did not come with it. I know that some in 98 and 99 at least did not have EGR. Thanks,
    Aaron L.
    Conover, NC

  2. #2
    EFILive Reseller wait4me's Avatar
    Join Date
    Aug 2004
    Posts
    1,348

    Default

    If you email me the tune file, i will send you a calibration file to put in so you can edit it yourself.
    "If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."

  3. #3

    Default

    Quote Originally Posted by wait4me
    If you email me the tune file, i will send you a calibration file to put in so you can edit it yourself.
    Thanks,

    I think I sent you a couple a week back, I'll resend them. What email should I be using? Thanks,
    Aaron L.
    Conover, NC

  4. #4
    EFILive Reseller wait4me's Avatar
    Join Date
    Aug 2004
    Posts
    1,348

    Default

    File sent.
    :)
    "If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."

  5. #5

    Default

    Thanks,

    Got another one for you too if you've got the time. I'll send another email.

    Thanks again,
    Aaron L.
    Conover, NC

  6. #6

    Default

    I tried to flash truck and got bootloader failed. Tried in slow mode and same thing. Test fails the same way. I'm not sure what's going on but the PCM will read just fine. Any ideas?
    Aaron L.
    Conover, NC

  7. #7
    EFILive Reseller wait4me's Avatar
    Join Date
    Aug 2004
    Posts
    1,348

    Default

    Last time i saw that, i just had to pull a radio fuse and it worked perfectly.
    "If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."

  8. #8
    Member JST's Avatar
    Join Date
    Jul 2007
    Posts
    65

    Default

    Quote Originally Posted by trudynosports View Post
    I tried to flash truck and got bootloader failed. Tried in slow mode and same thing. Test fails the same way. I'm not sure what's going on but the PCM will read just fine. Any ideas?
    x2 reject the bootloader

  9. #9
    Member JST's Avatar
    Join Date
    Jul 2007
    Posts
    65

    Default

    Quote Originally Posted by trudynosports View Post
    I tried to flash truck and got bootloader failed. Tried in slow mode and same thing. Test fails the same way. I'm not sure what's going on but the PCM will read just fine. Any ideas?
    Did you get it going ?

  10. #10
    Member JST's Avatar
    Join Date
    Jul 2007
    Posts
    65

    Default

    Need licensed WTF i have a linens for it ? this sucks bad

Page 1 of 2 12 LastLast

Similar Threads

  1. GETTING some HP from a stock Gen-IV V8
    By A.O.A in forum Gen IV V8 Specific
    Replies: 11
    Last Post: June 7th, 2009, 07:57 PM
  2. Stock Bin
    By teddyls1 in forum Gen III V8 Specific
    Replies: 2
    Last Post: May 10th, 2008, 04:03 AM
  3. RR and stock PCM
    By minytrker in forum RoadRunner Real-Time PCM Emulator
    Replies: 13
    Last Post: December 11th, 2006, 06:21 AM
  4. Need stock .bin
    By SSpdDmon in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: September 5th, 2006, 07:25 AM
  5. Is this a stock 02 ZO6 cal?
    By Redline Motorsports in forum General (Petrol, Gas, Ethanol)
    Replies: 11
    Last Post: August 15th, 2006, 11:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •