Results 1 to 6 of 6

Thread: Need a ls6 bin file please.

  1. #1
    Junior Member
    Join Date
    May 2007
    Posts
    28

    Default Need a ls6 bin file please.

    Been working on my tune for 2 months now and still can not get the car right. vetuning is all over the place. I found out that the maf I bought for my vette was for a 6.0l truck so my maf table was WAY too lean. Fixed that and the difference in the knock sensors frequency from 02 ls1 to 04 ls6 and still have issues with audible knock. KR does not show up in scanning any more and I have ran 109 VPrace fuel and still audible. Could be from straight headers and a borla stinger exhaust but, I still get popping if I feather the gas to WOT. Stomp on it and PE kicks in 12.5 all day long and no KR. I have even loaded a stock LS1 timing table (which is much lower then the ls6) and still nothing just a loss in power.
    Anyone have a stock ls6 tune with intake and headers they care to share?

  2. #2
    Junior Member gotabav's Avatar
    Join Date
    Jul 2007
    Posts
    38

    Default

    Here is my 2005 CTS-V stock tune. I have done mods to this tune and uploaded it with no problems, but this is the un-modified stock tune. Hope this helps.
    Attached Files Attached Files

  3. #3
    Junior Member
    Join Date
    May 2007
    Posts
    28

    Default

    Thank you very much

  4. #4
    Junior Member
    Join Date
    May 2007
    Posts
    28

    Default

    document is coming across as a .php document?

  5. #5
    Lifetime Member SSpdDmon's Avatar
    Join Date
    Jun 2005
    Posts
    1,558

    Default

    Quote Originally Posted by slopokegtp
    document is coming across as a .php document?
    You have to change it...

    Drop down the box below the file name and change it to All Files...

    Then, rename the file as a .tun file.

  6. #6
    Junior Member
    Join Date
    May 2007
    Posts
    28

    Default

    Thanks, that will work

Similar Threads

  1. P12 PCM file
    By Chevy366 in forum IL6,IL5,IL4 Atlas Engines - P12 PCM
    Replies: 12
    Last Post: June 29th, 2009, 08:28 AM
  2. cax file?
    By myws6formula in forum CAX Files
    Replies: 1
    Last Post: December 21st, 2008, 03:00 PM
  3. Would someone be willing to look at a log file?
    By stigmundfreud in forum Gen III V8 Specific
    Replies: 5
    Last Post: May 6th, 2007, 08:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •