My RR is going nutz...it is doing something weird at WOT...and sometimes at idle...definitely has a prob. Who can fix this and how do i contact them? I purchased it in February
My RR is going nutz...it is doing something weird at WOT...and sometimes at idle...definitely has a prob. Who can fix this and how do i contact them? I purchased it in February
I email craig moates. Mine stays wacked with a p1336 code.
craig@moates.net
Did you do the crank relearn proceedure? That code will go away when you do that.
"If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."
Yep. I've tried the crank relearn, hard reset, soft reset, flash through the aldl, emulation flash through the USB, clear all DTC's and it will reset with the key on engine off. Drop the same program into the stock ecm and no code. Drive the stock ecm for 2 weeks...no code...pull the program and COS5 from the stock ecm and load both into RR ......and get the code....