Results 1 to 2 of 2

Thread: COS5...which table controls the commanded AF <100F ECT at start?

  1. #1
    Senior Member
    Join Date
    Mar 2006
    Posts
    180

    Default COS5...which table controls the commanded AF <100F ECT at start?

    With A0008 set at 1.0 everywhere, my commanded AF at start is 11.1 : 1 After it idles for a few seconds it keeps leaning out until B3647 takes over.

    I can manipulate it with A0008, but with A0008 set at 1.0, which table commands the 11.1:1 until B3647 takes over?

  2. #2
    Lifetime Member Chevy366's Avatar
    Join Date
    Oct 2006
    Posts
    1,603
    2005 1500 HD , Custom OS3 SD tune .
    2006 Trailblazer
    Dinosaurs and Plants gave their lives so that we may drive , long live fossil fuel .

Similar Threads

  1. what table controls how fast it drops to idle when slowing down?
    By mvvette97 in forum Gen III V8 Specific
    Replies: 15
    Last Post: September 8th, 2009, 08:18 PM
  2. what table controls start up decay speed? "how fast it decays out"
    By mvvette97 in forum Gen III V8 Specific
    Replies: 4
    Last Post: March 19th, 2009, 11:10 PM
  3. What table controls Idle AFR???
    By BlackGMC in forum Gen III V8 Specific
    Replies: 2
    Last Post: June 27th, 2008, 03:46 AM
  4. Please explain table A0007 TPS VE TABLE cos5
    By WHYTRYZ06 in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: March 18th, 2008, 05:26 PM
  5. Which table controls (cold) Idle A/F ratio?
    By Thedude in forum General (Petrol, Gas, Ethanol)
    Replies: 8
    Last Post: December 17th, 2005, 07:03 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •