rr & wideband...

[rubbersidedown]

i can't get my wideband to sync up w/ efi live- i set the limits in to 0v=10 and 5v=20 in the lm programmer and in the set .txt files on the efi live config. The wideband reads 0-2 AFR @ idle and goes all the way up to 50 (on EFI live scanner), whereas the AFR on innovate display is 10.2 (when efi reads 0) and is @ 70 KOEO. WTF? This is all brand new equipment and I have everything I need, I just CANNOT get the calibration corrected... The readings can vary between 2 and 25 points at any given time

thanks

[mr.prick]

if you are using the LC-1 ,the outs are
.88333 = 10.00 AFR
4.21667 = 20.00 AFR

[Turbo595t]

Hello Rubber,

I found my usb to serial cable, I will check the settings in my lm1 and give you a call.

Mr. Prick, he has a lm1.

Brian