Results 1 to 9 of 9

Thread: Key needed????

  1. #1

    Default Key needed????

    I have a PCM from the salvage yard and when I go to the tune tool and try to even view the info, it requires a KEY. I don't have the key , is there anything that can be done? The PCM will run an engine so I believe that it has been reprogrammed by??? any ideas??

  2. #2
    Member
    Join Date
    Jun 2007
    Posts
    68

    Default

    Quote Originally Posted by v8vegaman
    I have a PCM from the salvage yard and when I go to the tune tool and try to even view the info, it requires a KEY. I don't have the key , is there anything that can be done? The PCM will run an engine so I believe that it has been reprogrammed by??? any ideas??

    Sounds like a previous tuner locked that PCM, i think youll have to completely reflash it to use it.
    WWW.EFIAlchemy.com

  3. #3

    Default

    Thnaks for your reply,
    How would I go about reflashing the PCM if I am locked out from seeing it, I'm new?

  4. #4
    Member
    Join Date
    Jun 2007
    Posts
    68

    Default

    Quote Originally Posted by v8vegaman
    Thnaks for your reply,
    How would I go about reflashing the PCM if I am locked out from seeing it, I'm new?
    No worries, im new to

    As far as i understand, you wont be able to see what is inside of that PCM now since it is locked, but you can completely reflash it with a new OS to get you started.
    WWW.EFIAlchemy.com

  5. #5

    Default

    cool man , I'll go try it.

  6. #6
    Junior Member
    Join Date
    Nov 2006
    Posts
    49

    Default

    If you haven't completely re-flashed the PCM yet, try this...

    http://www.forum.efilive.com/showpos...73&postcount=7

  7. #7
    Lifetime Member Biggsy's Avatar
    Join Date
    Jan 2007
    Posts
    410

    Default

    Quote Originally Posted by shallow bay
    If you haven't completely re-flashed the PCM yet, try this...

    http://www.forum.efilive.com/showpos...73&postcount=7
    You need to read that whole post, that reply was specific to that problem.
    The key is specific to the seed.

    Unfortunately, if the PCM is locked and you don't have the key, Efilive will NOT be able to reflash the PCM.

    There are people that can "Brute Force" the key out (it will cost you) or desoldering the flash chip and flashing it with a programmer will work.

    Sorry to be the bearer of bad news
    Dave.

  8. #8
    Junior Member
    Join Date
    Nov 2006
    Posts
    49

    Default

    Quote Originally Posted by Biggsy
    You need to read that whole post, that reply was specific to that problem.
    The key is specific to the seed.
    I read the whole post. I understand it depends on the seed but it definitely wouldn't hurt anything to try what was suggested. My response was more based on posts nine and ten in that thread.

    http://www.forum.efilive.com/showpos...91&postcount=9
    http://www.forum.efilive.com/showpos...4&postcount=10

  9. #9

    Default

    Thank you to all of you that have been willing to help. It looks like the PCM is locked out, That's ok, just try again on another, Thank you again
    Just one guy tryin' to make a difference

Similar Threads

  1. TCM OS needed
    By giesbrecht in forum Allison 5 & 6 Speed
    Replies: 0
    Last Post: March 4th, 2010, 08:43 AM
  2. E67 ECM and T42 TCM Help Needed
    By finishline in forum E37, E38 & E67 PFI ECM's
    Replies: 0
    Last Post: February 7th, 2010, 07:04 AM
  3. Help needed using DVT on a t42
    By MyM8V8 in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 12
    Last Post: November 10th, 2009, 07:12 PM
  4. Help Needed.
    By SV8346 in forum FlashScan V2 BB Logging
    Replies: 4
    Last Post: January 9th, 2008, 09:31 AM
  5. DTC Help Needed
    By VetPet in forum General (Petrol, Gas, Ethanol)
    Replies: 9
    Last Post: August 8th, 2007, 01:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •