Results 1 to 2 of 2

Thread: How do I make flashscan record RR?

  1. #1
    Member
    Join Date
    Jul 2007
    Posts
    74

    Default How do I make flashscan record RR?

    I connect to the RR ok thru the usb but when I try to connect using the flashscan it doesnt show the red and yellow button options to record? which controller do I select, same as for my ecu?
    AFR 205 heads, Mamo Ported FAST 90, 238/240 cam, 347 forged SB, 9 inch 3.89, 11x18 z07 wheels, svo 30, racetronix.
    You name it: all the bells and whistles

    http://www.fquick.com/99SS

  2. #2
    Lifetime Member Doc's Avatar
    Join Date
    Oct 2005
    Posts
    744

    Default

    Did you plug in the data port connector before plugging in the other end into the V2? I have seen some cars try to talk to the V2 and keep it from handshaking with the laptop. I have just gotten into the practice of pluggin in the laptop side to the V2 first. Hope this helps.

    2000 Silverado Full Size 4x4: Forged 6.2, H/C F1R Procharger
    98A4 Z28: 02 PCM H/C Forged 347, 9" Moser 3.73
    V1 V2 99+up RR COS #5 OLSD Dual Stg N20
    www.efialchemy.com
    www.greatamericancarwar.com

Similar Threads

  1. Setting the record straight on Gen IV ADM/DoD and VVT
    By TBMSport in forum Gen IV V8 Specific
    Replies: 19
    Last Post: April 2nd, 2010, 05:56 AM
  2. Replies: 8
    Last Post: September 9th, 2008, 10:08 AM
  3. BBL data display/record decimal places
    By Kevin Doe in forum FlashScan V2 BB Logging
    Replies: 8
    Last Post: March 27th, 2008, 02:46 PM
  4. Scan Tool won't monitor or record
    By ForcedTQ in forum Petrol / Gas
    Replies: 3
    Last Post: August 25th, 2007, 11:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •