all pid not valid ? tuning issues

[joe'sls1]

i have all my pid for speed density but wen it comes to tuning i have to slect the fast PID or IE any of the widebands,lc1,lm1's are all not valid and have a x through them but i continued any way reading a map of 1 to 35 cells when i copy with lables and try to multiply with lables to the main ve table i get numbers off 500 wich are totaly off do you guy have any solutions

[joecar]

First, connect to vehicle, enter correct VIN/OS ids, enter correct PCM type, and then validate PIDs.

Then on the PIDs F8 tab, on the PIDs that are not valid, do richtclick->More Info... this shows what other PIDs need to be selected for that PID to be valid; select those other PIDs, and do this until all the PIDs you want are valid (and you may want to save the PID selection to file).

Then, press yellow button to monitor (dash A gauges) or red button to record (dash A gauges and/or dash B charts).