Results 1 to 5 of 5

Thread: Cant log ls2 e40

  1. #1
    Member
    Join Date
    Jan 2007
    Posts
    53

    Default Cant log ls2 e40

    I cant get me scan tool to log a e40. It did generate a error report. Anyone have any ideas to fix this issue.
    Attached Files Attached Files

  2. #2
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    That error log shows no comms with the FlashScan unit at all. Maybe you just started the software and generated the error report. To be useful the error report needs to show some attempt at connecting to the vehicle.

    Try clicking on the connect toolbar icon, then if/when it fails, generate the erorr report.

    If you have tried clicking on the connect icon, what error message is displayed?

    Regards
    Paul
    Before asking for help, please read this.

  3. #3
    Member
    Join Date
    Jan 2007
    Posts
    53

    Default

    Ok, I will try that tomorrow and see how it goes.

    The efilive scan tool works fine on my ls1 car and lq4 truck. Just not my ls2,
    e40 ecm.

  4. #4
    Junior Member yellowC6ohio's Avatar
    Join Date
    Oct 2007
    Posts
    19

    Default

    try selecting different PIDs. sometimes mine wont connect at all if a certain PID is selected, it took me forever to figure out thats what was causing the problem. unfortunately i can't remember exactly which ones they were.

  5. #5
    Member
    Join Date
    Jan 2007
    Posts
    53

    Default

    Thanks....should have put resolved. Had a software bug

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •