Results 1 to 9 of 9

Thread: Post in here what you would like to see in the Vortech support.

  1. #1
    EFILive Reseller wait4me's Avatar
    Join Date
    Aug 2004
    Posts
    1,348

    Default Post in here what you would like to see in the 1998-2000 Vortec support.

    Like the title says, post in here if you think things need to be changed/added/ bug fixes ect. Thanks!
    Last edited by wait4me; September 30th, 2007 at 03:35 PM.
    "If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."

  2. #2
    Member
    Join Date
    May 2006
    Posts
    59

    Default

    I would love some L67 support!!!!!

  3. #3
    Lifetime Member MICK's Avatar
    Join Date
    Mar 2005
    Posts
    226

    Default This could be a long thread

    Jess,

    1: sort the rev limitter drama. I see there is no dwell parameters.

    2:Most of the guys are here because of the 0411 swap, they pick up a custom operating system for there s/c vortec using a 1222156 base from the express van.

    I know this throws more iorns in the fire, but a custom operating system for the allways gets kicked in the ass black box L31 pcm would be very cool.

    If you were going to head in that direction the later opps with the one main ve table run and tune much easier, yeah upgrade.


    O and getting the boost ve table to be joined to the main ve table would be a great option. (just one big VE table) good for tuning with beep beep on the track and full dyno pulls beep beep.

    It's wild how many people I see now going the 0411 swap...TT.....see what happens......

    3:finnish off the definition support for the Vortec's.....I see there is a few things missing in whats available to the puplic.

    Please.


    Humm, that should get things started.

    cheers

    Mick

    Ps: nice cat.

  4. #4
    New Member
    Join Date
    Jan 2007
    Posts
    6

    Default

    I agree that a custom operating system (2 bar) would be awesome.

  5. #5
    Lifetime Member
    Join Date
    Aug 2005
    Posts
    710

    Default

    O2 switchpoint adjustment would be very nice (requested by EFILive course student)
    I've had difficult locking the TCC in 2nd gear
    Would be great to see the RPM for each gear listed in the statusbar for transmission adjustments.
    Ability to perform a Full Flash

    Otherwise, Bi-Di controls would be the biggest need IMO.

    Edit: Can we get one of these threads for the Gen-III Calibrations?
    Last edited by dc_justin; October 3rd, 2007 at 07:00 AM.

  6. #6
    EFILive Reseller wait4me's Avatar
    Join Date
    Aug 2004
    Posts
    1,348

    Default

    An update should be completed today for Vortec 98-00. As soon as Ross looks it over and gives the ok.
    "If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."

  7. #7
    Lifetime Member
    Join Date
    Aug 2006
    Posts
    412

    Default

    Well, I don't have V2 and I have switched to the 0411 PCM in my 98 truck. I did the swap for 2 bar and rev limit reasons. So, Even though my opinion is irrelevant, I would say a Custom Operating System and Ignition Dwell adjustment.

  8. #8
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    are you able to get things done in this regard?
    there has been a couple of threads asking for specific
    options for later updates to address,
    and i haven`t seen many things that should be available (hiding selected cells)
    is one idea that i had asked for in particular.

  9. #9
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    are you able to get things done in this regard?
    there has been a couple of threads asking for specific
    options for later updates to address,
    and i haven`t seen many things that should be available (hiding selected cells)
    is one idea that i had asked for in particular.

Similar Threads

  1. Post in here what you would like to see in the I6 support.
    By wait4me in forum LL8 4.2L In-Line 6 - P10 PCM
    Replies: 68
    Last Post: September 19th, 2009, 04:47 AM
  2. Corvette C5 Vortech misfires
    By Hocky in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 5
    Last Post: August 25th, 2009, 12:18 PM
  3. 8100 Vortech Tuning
    By MN C5 in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: December 7th, 2008, 05:15 AM
  4. Vortech SQ S-trim .bin file..........
    By FreddyG in forum Gen III V8 Specific
    Replies: 0
    Last Post: September 2nd, 2007, 04:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •