Results 1 to 10 of 95

Thread: A way to cheat and fix your strims/ltrims using Rtac Very quickly.

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. October 1st, 2008 #13
    wait4me
    wait4me is offline
    EFILive Reseller wait4me's Avatar
    Join Date
    Aug 2004
    Posts
    1,348

    Default

    Here is an easier route to go to put in the ve fixer. Put this file in your documents folder/efilive v7.5/ user configuration/

    You need to say YES to the overwrite of the calc_pids.txt file.

    Then reopen the software and you will now see the pids under the calculated tab.
    Attached Files Attached Files
    "If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Emission Testing/Ways to Cheat?
    By onegonewild in forum Gen III V8 Specific
    Replies: 4
    Last Post: July 13th, 2009, 07:08 AM
  2. rtac question
    By ty_ty13 in forum RoadRunner Real-Time PCM Emulator
    Replies: 2
    Last Post: July 30th, 2007, 10:05 AM
  3. Why spend time getting ltrims from -13 down to -4?
    By onfire in forum General (Petrol, Gas, Ethanol)
    Replies: 11
    Last Post: April 9th, 2006, 12:03 PM
  4. Resetting all telltales quickly?
    By kp in forum General
    Replies: 2
    Last Post: April 16th, 2005, 01:31 PM
  5. Positive Ltrims In Cell 22
    By BowlingSS in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: March 17th, 2005, 03:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules