Page 10 of 10 FirstFirst ... 8910
Results 91 to 95 of 95

Thread: A way to cheat and fix your strims/ltrims using Rtac Very quickly.

  1. #91
    Junior Member
    Join Date
    Dec 2013
    Posts
    21

    Default

    So I have this all set up, now it leans out my stft to the point it will barely run. My o2 show 800-1000mv which should be rich and the reason it keeps subtracting from my v.e.table. I have it set for olsd and occasionally I see ltft at +2. Does this make any sense? This seem to be worse at idle. Am I missing a filter or something simple. I followed the instructions for SAE_generic and the Cal_pid.txt. 4206 is set to enable.

  2. #92
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by mecnic99 View Post
    So I have this all set up, now it leans out my stft to the point it will barely run. My o2 show 800-1000mv which should be rich and the reason it keeps subtracting from my v.e.table. I have it set for olsd and occasionally I see ltft at +2. Does this make any sense? This seem to be worse at idle. Am I missing a filter or something simple. I followed the instructions for SAE_generic and the Cal_pid.txt. 4206 is set to enable.
    Are you sure it's running from VE (and not MAF)...?

    Are the HO2Sx1 voltages swinging (above 600 mV and below 300 mV)...? If so, how frequently (per second)...?

  3. #93
    Junior Member
    Join Date
    Dec 2013
    Posts
    21

    Default

    No I'm not sure it's running on the v.e only. I have maf signal disconnected p0101 no error, p0102 no mil and p0103 no mil, and fail frequency set to 150 so it should be v.e. only. Yes the o2s switch above and below 3 and 600mv.

  4. #94
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Do you get a MAF DTC triggering immediately on engine start...?

  5. #95
    Junior Member
    Join Date
    Dec 2013
    Posts
    21

    Default

    Yes

Page 10 of 10 FirstFirst ... 8910

Similar Threads

  1. Emission Testing/Ways to Cheat?
    By onegonewild in forum Gen III V8 Specific
    Replies: 4
    Last Post: July 13th, 2009, 06:08 AM
  2. rtac question
    By ty_ty13 in forum RoadRunner Real-Time PCM Emulator
    Replies: 2
    Last Post: July 30th, 2007, 09:05 AM
  3. Why spend time getting ltrims from -13 down to -4?
    By onfire in forum General (Petrol, Gas, Ethanol)
    Replies: 11
    Last Post: April 9th, 2006, 11:03 AM
  4. Resetting all telltales quickly?
    By kp in forum General
    Replies: 2
    Last Post: April 16th, 2005, 12:31 PM
  5. Positive Ltrims In Cell 22
    By BowlingSS in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: March 17th, 2005, 02:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •