A way to cheat and fix your strims/ltrims using Rtac Very quickly.

[BrianC98Z28]

so you have to have a roadrunner for this to work??

[hquick]

Yep. But I believe you can map your STFT's and copy paste and achieve a similar result.

[mikeyayell]

So is a road runner necessary?

[Chevy366]

So is a road runner necessary?

Quote from Page 1 , post #8 : T is for any controller you have strims set up on. not just ls1. also it dont have to be used with a roadrunner. You can use it just like your Ben filter for the ve tables with the paste and multiply feature.

So , no , don't need RR .

[Chalky]

I had this working before I upgraded. Now I have the pid setup and selected but cannot setup a MAP as the Strim is not available as a dropdown menu option.

Any ideas?

[hquick]

Have you checked that all the cal_link files are upgraded?

[Chalky]

Yes. I have gone over both files that were modified. I can't understand why it is an available pid but not available in the MAP menu.

What the hell, I'll check them again.

[Chalky]

OK. When I look at teh pid descriptions, for Strim under units , it is blank. Any ideas? I have checked my entries in both text files numerous times. I am assuming the issue is in the sae_genereic.txt file but I cannot find it.

NE1?

[hquick]

Have you made the changes to BOTH cal_link files. There's one in My doc's as well as one in program files. The sae_generic file is in program files only. (all under user config).

[Chalky]

All three txt files seems to be in place. Here is a copy of the pids. The strim pid shows up but with no entry for units. When I try to create a map, the strim is not available in the dropdown menu for data parameter.