Results 1 to 4 of 4

Thread: Newb checking in!

  1. #1
    Lifetime Member Kevin Doe's Avatar
    Join Date
    Aug 2007
    Posts
    273

    Default Newb checking in!

    Hey guys, my name is Kevin and I'm new here, and new to EFI Live. I purchased V2 flash and tune. I'm from Cincinnati, OH. I have a 1993 RX-7 that I swapped a LS1/T56/Cobra diff into. Its been being built for the last 10 months in my garage by myself. I fabricated everything myself and I'm proud to say that. At this point, I'm ready to start the car up and get it running.

    A rundown of my engine modifications is as follows. MS4 cam with supporting mods, 1 7/8" long tube headers, 3" true dual exhaust through an X-pipe, Dual 3.5" exhaust, ported and shimmed LS6 pump, ARP rod bolts, LS6 manifold (stock for GTOs). I have no MAF, because of the 3.5" dual intake, and because I thought it would run better with the large cam on speed density. I've tuned many cars, some by direct editing of the HEX code (DSMs), a few EVOs with ECUflash, and a standalone called Performance Electronics. I'm not totally new to tuning, just new to GM PCM tuning. I think I'll pick it up quick, or so I hope!

    I have a thread in the COS section right now about what I can use for my GTO PCM, please check ti out if you get a chance.

    Here is a link to the build thread of my car. It is EXTREMELY long, and very detailed (40+ pages). Hundreds upon hundreds of pictures of nearly every detail of my build.
    http://www.v8rx7forum.com/v8-rx7-tec...it-56k-no.html

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Kevin,

    Welcome to the forum...

    Nice job, nice welds, nice rims, nice doggie...

    Curse that can of brake kleen...

    You may want to have a read of the Auto VE tutorial: http://www.efilive.com/download.aspx#downloads7

  3. #3
    Lifetime Member Kevin Doe's Avatar
    Join Date
    Aug 2007
    Posts
    273

    Default

    Nice, you must have actually looked through the entire thread. Impressive. I figured most people would lose interest after page 5 or so. LOL.

    Thanks. Now to get this tuning up and running and I'll be all set.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I looked at all the pics...

Similar Threads

  1. Checking/Monitoring injector performance?
    By chad231 in forum Duramax LLY
    Replies: 1
    Last Post: November 30th, 2009, 09:31 AM
  2. Checking TC and TF
    By Kurtomac in forum Gen III V8 Specific
    Replies: 1
    Last Post: February 7th, 2009, 02:16 AM
  3. Checking out tune w/o WBO2?
    By Garry in forum Gen III V8 Specific
    Replies: 5
    Last Post: November 30th, 2007, 12:18 PM
  4. checking my understanding (2bar and maf)
    By SScarTuning in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 9
    Last Post: October 27th, 2007, 02:25 PM
  5. USB Drivers - Checking
    By Kiwi Ed in forum Tips and tricks
    Replies: 2
    Last Post: June 30th, 2007, 04:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •