Results 1 to 3 of 3

Thread: Can not flash due to license

  1. #1
    Junior Member
    Join Date
    Dec 2006
    Posts
    45

    Default Can not flash due to license

    I have EFILive with FSP 1.2 datalogger/cable. I have programmed the PCM on my car many times. Recently, the tune software (V7.3.3 build 533) required me to couple my car to the cable again. I have only connected the cable to one car (same PCM and VIN). The PCM licensing shows two PCM 2EB3CT452316 and PCM 000000000000.

    Current problem. The tune software will not flash the PCM until I license the cable to the PCM again. What am I doing wrong?

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I pm'd Paul.

  3. #3
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    See this thread for more info:
    http://forum.efilive.com/showthread.php?t=4093

    Send me an email at paul@efilive.com with the following information:
    FlashScan serial number, auth code and a screen shot of the PCM licenses that have been used on your FlashScan cable.

    See this thread for instructions on how to obtain that information:
    http://forum.efilive.com/showthread.php?t=5790

    Regards
    Paul
    Before asking for help, please read this.

Similar Threads

  1. Pre Full Flash to Full Flash Tune Question
    By Donovan in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 1
    Last Post: January 13th, 2010, 11:43 AM
  2. new ecm - license???
    By Wolfie in forum Purchase and Shipping
    Replies: 18
    Last Post: March 13th, 2009, 03:06 AM
  3. Need a license for TCM & V1
    By horsehaulin in forum Allison 5 & 6 Speed
    Replies: 1
    Last Post: May 28th, 2008, 07:36 AM
  4. No license after full flash!
    By Burnt_Bizcut00 in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: April 20th, 2008, 10:33 AM
  5. Flashscan has license avail. but won't let me license PCM
    By Wasted Income in forum Purchase and Shipping
    Replies: 1
    Last Post: April 6th, 2007, 09:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •