Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Pre release 7.5.1

  1. #1
    Lifetime Member
    Join Date
    Feb 2007
    Posts
    594

    Default Pre release 7.5.1

    There is no mention of BB logging or LC-1 to serial port implimentation in the readme file? I thought this was to be included in this update?

  2. #2
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    The 7.5.x update includes the Virtual VE update. The other updates will be in the form of firmware updates for the FlashScan V2.

    Just as an FYI (and not to start another thread), but Black Box logging has just started being beta tested on the AutoCal hardware. This will then be ported to the FlashScan V2.
    Andrew
    EFILive Crew


  3. #3
    Lifetime Member
    Join Date
    Jan 2007
    Posts
    298

    Default

    Just installed but haven't tested.

    Has the DFCO bit been id'ed yet? Someone on this fourm said something about it existing but not ID'ed.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by 2002_z28_six_speed
    Just installed but haven't tested.

    Has the DFCO bit been id'ed yet? Someone on this fourm said something about it existing but not ID'ed.
    GM.STATE05... I see it there but haven't read it yet.

  5. #5
    Lifetime Member Garry's Avatar
    Join Date
    Jun 2006
    Posts
    649

    Default

    Is the any chance that both scan & flash will uniformly use locale settings or not? Scan 7.5.1 still uses locale settings, whereas Flash still doesn't ... :(
    If it's to hard to get it into Flash, can't you just disable it in the Scan tune?
    Garry Glendown * '17 Fifty 2SS MT * 99 Firehawk Convertible (for sale)

  6. #6
    Lifetime Member Bruce Melton's Avatar
    Join Date
    Oct 2003
    Posts
    674

    Default

    Quote Originally Posted by Garry
    Is the any chance that both scan & flash will uniformly use locale settings or not? Scan 7.5.1 still uses locale settings, whereas Flash still doesn't ... :(
    If it's to hard to get it into Flash, can't you just disable it in the Scan tune?
    Don't understand what you are saying, but wish I did cause I think it relates to switching back and forth between Scan and Tune???

    2000 C5 Coupe, 6M, Callies/Mahle stroked LS7 (441), Blackwing, Halltech, LS3 intake, 90mm Shaner TB, ported L92 heads, FAST 50# inj, not too much cam, Kooks 1 7/8" headers , 3" catless mid pipes, Z TIs, track suspension, , 3:90 rear, EFI V2, LM-2, etc.
    PowrMax Performance

    100 mm PowrMAF

    LM-2 EFILIve package with TAQ -sLM2 V-2 serial cable> Package deals

  7. #7
    Lifetime Member Garry's Avatar
    Join Date
    Jun 2006
    Posts
    649

    Default

    yes and no ...

    If EFILive is running on a non-US PC (i.e., one that has a locale that uses "," as a decimal delimiter), Scan will use it for fractional numbers, e.g. "14,63". Flash tool, in contrast, doesn't honor this, using "14.63" no matter what the locale setting ...

    Up to that point, it isn't a real problem - until you start doing some tuning, copying data from Scan to Flash (e.g. during AutoVE tuning). The multiply will fail, as the copied data with the "," doesn't work with the "." in Flash ...

    I reported this problem quite some time ago ...
    Garry Glendown * '17 Fifty 2SS MT * 99 Firehawk Convertible (for sale)

  8. #8
    Lifetime Member Bruce Melton's Avatar
    Join Date
    Oct 2003
    Posts
    674

    Default

    Aaah, well, ok

    2000 C5 Coupe, 6M, Callies/Mahle stroked LS7 (441), Blackwing, Halltech, LS3 intake, 90mm Shaner TB, ported L92 heads, FAST 50# inj, not too much cam, Kooks 1 7/8" headers , 3" catless mid pipes, Z TIs, track suspension, , 3:90 rear, EFI V2, LM-2, etc.
    PowrMax Performance

    100 mm PowrMAF

    LM-2 EFILIve package with TAQ -sLM2 V-2 serial cable> Package deals

  9. #9
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Hi Garry,

    I'll look into it again, but last time (if I recall correctly) I could not make it fail the way you described. Can you tell me exactly which non-US locale you have selected?

    Or is it just any locale that uses "," for decimal placeholder?

    Regards
    Paul

    Quote Originally Posted by Garry
    yes and no ...

    If EFILive is running on a non-US PC (i.e., one that has a locale that uses "," as a decimal delimiter), Scan will use it for fractional numbers, e.g. "14,63". Flash tool, in contrast, doesn't honor this, using "14.63" no matter what the locale setting ...

    Up to that point, it isn't a real problem - until you start doing some tuning, copying data from Scan to Flash (e.g. during AutoVE tuning). The multiply will fail, as the copied data with the "," doesn't work with the "." in Flash ...

    I reported this problem quite some time ago ...
    Before asking for help, please read this.

  10. #10
    Lifetime Member Garry's Avatar
    Join Date
    Jun 2006
    Posts
    649

    Default

    I reckon any ","-locale should do ...
    Garry Glendown * '17 Fifty 2SS MT * 99 Firehawk Convertible (for sale)

Page 1 of 2 12 LastLast

Similar Threads

  1. EFI not same release as V2?
    By RPM Motorsports in forum General (Petrol, Gas, Ethanol)
    Replies: 18
    Last Post: June 20th, 2008, 04:57 PM
  2. New release 533
    By eboggs_jkvl in forum FlashScan V2
    Replies: 2
    Last Post: July 12th, 2007, 01:34 AM
  3. Pre release FYI
    By Techfan in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: April 28th, 2006, 09:42 AM
  4. V7.1.9 Pre-release is now available
    By Blacky in forum General (Petrol, Gas, Ethanol)
    Replies: 20
    Last Post: April 13th, 2005, 01:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •