Page 1 of 3 123 LastLast
Results 1 to 10 of 27

Thread: What are your smoothing techniques

  1. #1
    Lifetime Member
    Join Date
    Sep 2003
    Posts
    688

    Default What are your smoothing techniques

    and how much do you smooth by.

    Also what would you conisder a dialed in car? A BEN_Factor of +/-2% or are you all going grey trying to get the to 1.00
    EFILive - The Single version of the Truth

    Larry - HumpinSS

  2. #2
    Guess who's back!!!! Black02SS's Avatar
    Join Date
    Jan 2004
    Posts
    1,355

    Default

    I have recently tried smoothing by 70% and it seems to be too much but the table looks good. I don't know how we can smooth the ve table to get it to look good and still retain the +/- 2% that we need. Not unless we just need to keep going over and over on it until it falls into place.

  3. #3
    Lifetime Member
    Join Date
    Sep 2003
    Posts
    688

    Default

    Its gotten to the point where i think its moving three digits past the decimal.


    Pics of the log and tune to follow in t-5 minutes
    EFILive - The Single version of the Truth

    Larry - HumpinSS

  4. #4
    Guess who's back!!!! Black02SS's Avatar
    Join Date
    Jan 2004
    Posts
    1,355

    Default

    I believe the same as I was double checking the idle on a car last night. I had approx 43 after the Ben Factor, but after I smoothed the table 70%, it jumped up to 47 and messed up the actual afr. I know that there is a reson for a smooth ve table, but how can we get it to be smooth without it altering the actual afr? I flashed this car a total of 9 times to get it all dialed in and after the 9th time, smoothing and all, the idle was still out 4% and only started about 6% out.

  5. #5
    Lifetime Member
    Join Date
    Sep 2003
    Posts
    688

    Default


    EFILive - The Single version of the Truth

    Larry - HumpinSS

  6. #6
    Guess who's back!!!! Black02SS's Avatar
    Join Date
    Jan 2004
    Posts
    1,355

    Default

    I don't have my laptop with me or I would post a screen shot of mine as well. My VE table is smoother, but my ben factor doesn't look near as close. Now if I don't smooth the table, then it falls right into place. It appears the question again is, how smooth does this table have to be? We know the mafless GTS using a spikey table but we hear again how they interpolate and the table needs smooth...... What were you using here to smooth, 50%????

  7. #7
    Lifetime Member
    Join Date
    Sep 2003
    Posts
    688

    Default

    Quote Originally Posted by black02ss
    I don't have my laptop with me or I would post a screen shot of mine as well. My VE table is smoother, but my ben factor doesn't look near as close. Now if I don't smooth the table, then it falls right into place. It appears the question again is, how smooth does this table have to be? We know the mafless GTS using a spikey table but we hear again how they interpolate and the table needs smooth...... What were you using here to smooth, 50%????
    Yup 50.... 60 and 70 seemed to have me chasing the wind
    EFILive - The Single version of the Truth

    Larry - HumpinSS

  8. #8
    Guess who's back!!!! Black02SS's Avatar
    Join Date
    Jan 2004
    Posts
    1,355

    Default

    I agree 100%. Got any ideas??

  9. #9
    Lifetime Member
    Join Date
    Sep 2003
    Posts
    688

    Default

    LOL If i did I wouldnt be posting here and you would be the first to know....
    EFILive - The Single version of the Truth

    Larry - HumpinSS

  10. #10
    Guess who's back!!!! Black02SS's Avatar
    Join Date
    Jan 2004
    Posts
    1,355

    Default

    Ok your worthless, anyone else???

Page 1 of 3 123 LastLast

Similar Threads

  1. E38 Economy techniques
    By macca_779 in forum Tuning For Economy
    Replies: 40
    Last Post: January 20th, 2011, 12:02 PM
  2. Why should we use the smoothing after tuning VE ?
    By wesam in forum Gen III V8 Specific
    Replies: 8
    Last Post: May 25th, 2010, 02:33 PM
  3. VE Smoothing
    By nonnieselman in forum Gen III V8 Specific
    Replies: 15
    Last Post: September 8th, 2008, 06:19 AM
  4. Smoothing Maps
    By Gelf VXR in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: March 10th, 2008, 04:44 PM
  5. Smoothing in the VE table??
    By oztracktuning in forum General (Petrol, Gas, Ethanol)
    Replies: 12
    Last Post: March 12th, 2006, 05:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •