VE table scale up by how much?

[queso]

For a ballpark initial Main VE table to be used in a 408 LQ9 with a FAST 90 with 90mm throttle body.

I will be lowering the 400/800/1200 RPM by 60%/70%/80% normally done to get it to idle with the cam (Texas-Speed MS-3 cam). But I was wondering if I should scale up the rest of the VE table to account for the bigger intake & tb.

I just want to get it to run, so I can break in the motor and take if for a dyno tune.

I'm starting with a totally stock 2002 LS1 PCM tune setup for the stock LS6 intake.

[SSbaby]

After you adjust for displacement, it might not be necessary to do anything more assuming you just want to run it in.