Results 1 to 3 of 3

Thread: Tuning Tool not tracking MAP properly?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. October 13th, 2007 #1
    gto_in_nc
    gto_in_nc is offline
    Senior Member
    Join Date
    Feb 2007
    Posts
    145

    Default Tuning Tool not tracking MAP properly?

    I have recently noticed that my Tuning Tool does not accurately track MAP readings logged in the Scan Tool. In tables like {B0101} Main VE Table and {B3605} Commanded Fuel in Open Loop, my log of SAE.MAP will show 95-105 kPa but the tracked spot will show 30ish. The point moves and it doesn't sit at zero; instead it's like it is off by a factor of three.

    I don't use tracking of links cells all the time so I'm not sure when it changed but I'm suspicious of my recent upgrade to V7.5.1 (Build 21). Or maybe I just inadvertantly changed something and shot myself in the foot? I dunno...

    Am I alone?
    Last edited by gto_in_nc; January 12th, 2008 at 12:03 PM.
    2004 Pontiac GTO - Quicksilver/red/m6
    1-of-344
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Tuning tool not following scan tool (VE table)
    By dvx in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: October 19th, 2008, 09:43 AM
  2. Cannot get scan tool and tune tool linked for cell tracking
    By DuramaxPowered in forum Diesel
    Replies: 4
    Last Post: January 6th, 2008, 11:47 AM
  3. Tuning Tool ?
    By DrX in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: October 16th, 2006, 06:09 AM
  4. When I get the tuning tool
    By DebianDog in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: March 30th, 2004, 02:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules