Results 1 to 3 of 3

Thread: Tuning Tool not tracking MAP properly?

  1. #1
    Senior Member
    Join Date
    Feb 2007
    Posts
    145

    Default Tuning Tool not tracking MAP properly?

    I have recently noticed that my Tuning Tool does not accurately track MAP readings logged in the Scan Tool. In tables like {B0101} Main VE Table and {B3605} Commanded Fuel in Open Loop, my log of SAE.MAP will show 95-105 kPa but the tracked spot will show 30ish. The point moves and it doesn't sit at zero; instead it's like it is off by a factor of three.

    I don't use tracking of links cells all the time so I'm not sure when it changed but I'm suspicious of my recent upgrade to V7.5.1 (Build 21). Or maybe I just inadvertantly changed something and shot myself in the foot? I dunno...

    Am I alone?
    Last edited by gto_in_nc; January 12th, 2008 at 11:03 AM.
    2004 Pontiac GTO - Quicksilver/red/m6
    1-of-344

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Pretty sure one (say the scanner) will be set to imperial, the other (the tune tool) to metric.

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Senior Member
    Join Date
    Feb 2007
    Posts
    145

    Default

    Well, damn! Thank you, Ross! SAE.MAP in Scan was set on PIDs (F8) to use Imperial as default.
    Last edited by gto_in_nc; October 13th, 2007 at 03:35 PM. Reason: 'cause I'm stupid.

Similar Threads

  1. Tuning tool not following scan tool (VE table)
    By dvx in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: October 19th, 2008, 08:43 AM
  2. Replies: 4
    Last Post: January 6th, 2008, 10:47 AM
  3. Tuning Tool ?
    By DrX in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: October 16th, 2006, 05:09 AM
  4. When I get the tuning tool
    By DebianDog in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: March 30th, 2004, 01:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •