Results 1 to 2 of 2

Thread: Shift Point Adjuster not working?

  1. #1
    Lifetime Member Ninety8C5's Avatar
    Join Date
    Sep 2003
    Posts
    454

    Default Shift Point Adjuster not working?

    I was just playing around with a 98 A4 Vette tune changing the rear end ratio and tire diameter and the 'Shift Point Correction' didn't change. I was using the new 7.5.1 release (Build 21). I kinda remember this working in a previous issue but don't remember which. Or is it that I ain't doing something right (I've being doing a lot of that lately)?

  2. #2
    Lifetime Member Ninety8C5's Avatar
    Join Date
    Sep 2003
    Posts
    454

    Default

    I input old & new tire size and diff and the 'Adjust by:' stays at 0.00. Is there somthing else that needs to be selected/clicked on or should the 'Adjust by:' change as you input info?

    I just tried several other years and it looks like it doesn't work on 1997/1998 tunes. On other years the original tire size and diff are filled in. On 97/98 cars no original data, but even putting in old & new data doesn't cause 'Adjust by:' to change.

Similar Threads

  1. trouble with shift point tuning
    By hot-dog in forum Allison 5 & 6 Speed
    Replies: 4
    Last Post: March 23rd, 2009, 09:13 AM
  2. O2 Switch Point
    By Sid447 in forum Gen III V8 Specific
    Replies: 4
    Last Post: January 29th, 2009, 08:13 PM
  3. Disable adaptive shift learning after Shift Kit Install
    By BlackGMC in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 3
    Last Post: January 24th, 2008, 04:49 AM
  4. shift point adjustment not working anymore
    By Alvin in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 19
    Last Post: October 2nd, 2007, 11:57 AM
  5. 4L60E WOT shift point settings
    By billiardcue in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 8
    Last Post: May 2nd, 2007, 08:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •