Results 1 to 4 of 4

Thread: Boost VE map...............

  1. #1
    Senior Member
    Join Date
    May 2006
    Posts
    179

    Default Boost VE map...............

    When using the COS3, and logging BEN factors, can I just modify the existing map to show 105-285 KPa or is there a separate map that I should make for when the car is going into boost?

    What pid's should I use if using a different map?

    Thanks in advance!

  2. #2
    Lifetime Member johnv's Avatar
    Join Date
    Jan 2005
    Posts
    338

    Default

    Quote Originally Posted by FreddyG
    When using the COS3, and logging BEN factors, can I just modify the existing map to show 105-285 KPa or is there a separate map that I should make for when the car is going into boost?

    What pid's should I use if using a different map?

    Thanks in advance!
    Use A0009 Boost VE table in the "EFILive Custom Calibration" tab

    Download the tutorial it's all it there.

    Cheers
    John

  3. #3
    Lifetime Member
    Join Date
    Aug 2005
    Posts
    709

    Default

    Quote Originally Posted by FreddyG
    When using the COS3, and logging BEN factors, can I just modify the existing map to show 105-285 KPa or is there a separate map that I should make for when the car is going into boost?

    What pid's should I use if using a different map?

    Thanks in advance!
    Yes, you may use the same map. When you're done logging, highlight the entire table and copy with labels (Shift+Ctrl+C). Then you can paste with labels into both tables.

    Justin
    2013 Yukon Denali XL - TVS2300, ID1000, E85
    2013 Silverado CCSB 6.2L - TVS1900, DTH 349Y-1-C
    1972 K5 Blazer - LQ4, TVS2300, 4L80E

  4. #4
    Senior Member
    Join Date
    May 2006
    Posts
    179

    Default

    Thank You Very Much Guys!

Similar Threads

  1. What AFR in Boost?
    By zapp168 in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 6
    Last Post: July 24th, 2007, 12:03 AM
  2. Use MAF for off boost/2 Bar SD when in boost
    By Earl H in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 26
    Last Post: May 24th, 2007, 11:58 AM
  3. Boost and EGT's
    By minytrker in forum Duramax LB7
    Replies: 5
    Last Post: February 14th, 2007, 02:41 AM
  4. Can you log boost?
    By AustinL911A in forum General
    Replies: 9
    Last Post: January 5th, 2006, 06:55 AM
  5. What happens when you go into boost?
    By hpcubed in forum General (Petrol, Gas, Ethanol)
    Replies: 18
    Last Post: March 29th, 2005, 04:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •