where is my timing?
COS5.....Under boost lets say i have 25 deg in my high/low octane table.....and at 10psi i tell it to pull 10 degrees via the boost timing table. well i SHOULD have 15deg of timing but instead i will have 11.5-13.5 No knock retard and i cant find anything else that can pull timing. i have zerod out the iat and ect timing maps.......any idea?
Burst knock can pull timing. Try increasing the burst knock delta table from the factory 0.02 grams/cylinder to .04~.05 grams/cylinder.
shouldnt burst show up as knock retard though?
No, it's a different PID. Log ALL your timing PIDs and see which one is pulling your timing.Originally Posted by Cablebandit
01 ECSB 1/2 ton 4x4 Forged 5.7 LS1 GMC
Custom KBracing front mounted, BW S480, intercooled turbo
i think you guys have found my timing. In the area where its missing, it matches up to the burst knock table. thanks!!
Welcome.
that was it!!!
Posting Permissions
Reply With Quote