I am trying to log My 08 Z06 and I find when validating the PID's all of the E-38 specific pids are X out. The data that does show appears to be OK at idle, have not tried it on the road yet. Any ideas?
Jim Wilson
I am trying to log My 08 Z06 and I find when validating the PID's all of the E-38 specific pids are X out. The data that does show appears to be OK at idle, have not tried it on the road yet. Any ideas?
Jim Wilson
i have a probem when setting specefic pids that i want monitor....dashboard does not work and data does not seem to register....when i go to the e38 metric pids it works....still learning the program but it seems like there are a few bugs
Vettemaster, I will try the E38 metric pid list. The reason I haven't already tried it is because it was only 18 channels and I thought we were to shoot for 24.
Sanity check:
- you entered the correct VIN/OS...?
- you entered the correct controller type...?
- you validated pids...?
I pm'd Tech Support.
i have entered the correct vin, controller and verified pids....when setting my own pids it doesn't work.....only works when i use the e38 metric setting...i have been able to add pids to monitor when using e38 metric but stiil have some issues...i cannot get ltft's cells....i do see ltft's when monitoring but cannot get them to display like i used to with my v6 version for my ls1...Originally Posted by joecar
Some of the DMA PID's are not supported on the 2008 models yet, we'll get there....
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.