This question is in reference to the DTC's P2033 and P0546, EGT Sensor DTC's. If I use a DPF delete pipe w/bungs on my LMM, port the factory EGT sensors into the proper bungs in the replacement straight pipe, and do not disable the DTC's as stated above, will I be OK? In other words no codes reported for EGT sensors as all is well with EGT temps? My plan is to retain the EGT sensors so my EDGE Insight can still monitor the sensors via the ODBII connection rather than having to add new/separate EGT sensor.
TIA for replying by anyone who has knowledge of this process.