Results 1 to 7 of 7

Thread: Tuning VE with RR...no effect

  1. #1
    Junior Member
    Join Date
    Aug 2007
    Posts
    32

    Default Tuning VE with RR...no effect

    I recently purchased and received my RR for use on a 99 WS6 T/a that previously I tuned and upgraded to a COs3. Ive installed the RR pcm and can read my tune for the vehicles original pcm. Boosted VE table matches as well as other tables ive checked. Im working with the main ve table and making changes with no change in my wideband. Can someone help me? Im using a V2 scanner and im watching status and placement in the map and making changes in that area with no effect. Thanks in advance, Chris

  2. #2
    EFILive Reseller kbracing96's Avatar
    Join Date
    Sep 2005
    Posts
    584

    Default

    Is the car in SD mode, or is it still using the MAF? If it still has the MAF enables, it running mostly on it, not the VE table.
    01 ECSB 1/2 ton 4x4 Forged 5.7 LS1 GMC

    Custom KBracing front mounted, BW S480, intercooled turbo


  3. #3
    Lifetime Member
    Join Date
    Apr 2003
    Posts
    379

    Default

    Is the road runner in emulation more to make real time changes , you should have the button highlighted.

  4. #4
    Junior Member
    Join Date
    Aug 2007
    Posts
    32

    Default

    Its in SD mode and yes its highlighted. Ive made big changes with VE numbers in small areas to see if its working...No changes were noticed. It would change idle speed though.

  5. #5
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    the RR makes smaller changes than the usual paste and multiply,
    because it will go up and down with changing conditions.
    flash memory sucks!

  6. #6
    Lifetime Member
    Join Date
    Apr 2003
    Posts
    379

    Default

    Quote Originally Posted by mr.prick
    the RR makes smaller changes than the usual paste and multiply,
    because it will go up and down with changing conditions.
    flash memory sucks!

    ????????????????????

    You make the same paste and multiplier changs justthe results are instant ,

    try adding 15% across the board and see what effect it makes tio verify your RR is working

  7. #7
    Junior Member
    Join Date
    Aug 2007
    Posts
    32

    Default Its all fine

    Thanks very much for everyones help. Geoff at Thunder Racing was a big help. The changes that im making werent big enough to see an change. RR is working flawlessly!!!!!! Thanks,
    Chris

Similar Threads

  1. do injectors have an effect on fuel psi?
    By mr.prick in forum Gen III V8 Specific
    Replies: 28
    Last Post: June 6th, 2008, 02:25 AM
  2. Ported TB effect on VE?
    By Kevin Doe in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: April 22nd, 2008, 01:02 AM
  3. Effect of altitude on tunes
    By Thumper in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: March 3rd, 2008, 11:02 AM
  4. H0105 and H0109 do not seem to have any effect
    By jpgmtech in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 0
    Last Post: July 9th, 2007, 03:15 AM
  5. Temp effect on AFR?
    By 98WS6_JPM in forum General (Petrol, Gas, Ethanol)
    Replies: 13
    Last Post: March 7th, 2006, 04:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •