Results 1 to 8 of 8

Thread: Flash Scan Support LS2?

  1. #1

    Default Flash Scan Support LS2?

    I noticed that the 05 Corvette is listed but I wasn't sure whether the LS2 is supported as of yet. Thanks,
    Aaron.
    Aaron L.
    Conover, NC

  2. #2
    Guess who's back!!!! Black02SS's Avatar
    Join Date
    Jan 2004
    Posts
    1,355

    Default

    I do not believe it is available as of yet due to the difference in hardware and software.

  3. #3
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    I vaguely remember hear a timeframe of around November.
    Andrew
    EFILive Crew


  4. #4
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,486

    Default

    We are aiming for a Nov/Dec release date for our LS2 product. Unfortunately that puts us smack-bang in the middle of the pre-Christmas rush. Events may possibly conspire against us and push the release out to Jan. However, we are doing what we *can* do to try and have it ready before Christmas.

    Regards
    Paul

  5. #5
    New Member
    Join Date
    Oct 2004
    Posts
    8

    Default

    Hows it all going with the LS2 software ?

  6. #6
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Software is only half the story, we have some new hardware designed to suit the CAN communications bus, plus many enhancements over our current hardware, no details yet of course, but that is coming along very well and appears that might be looking good for a 'preview' at SEMA, fingers crossed. We are thinking we will probably start doing selected Beta testing in Dec/Jan if everything runs well up to then.

    The software is also going to be rewitten too (wow Paul will be busy).

    We have learnt alot with our first generation hardware and tuning software, the next version is going to be pretty special.

    As far as the LS2 ECM goes, we have been chipping away at it but as of right now it is on hold until we get the 1998 PCM finished. Time permitting we might try to post up some screen shots of the LS2 tables in progress in the next few weeks, we have progressed very well in that area, though it's not a priority to tease you all just yet , afterall, it's just a bunch of graphs and parameters :lol:

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  7. #7
    Member
    Join Date
    Dec 2004
    Posts
    71

    Default

    wish i had the smarts to help .seems the others have the jump .least when you guys get it done it will be right..question is will we be able to upgrade our ls1 system to ls2using the same cable at reas cost?? or will we be starting again..

  8. #8
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,486

    Default

    Quote Originally Posted by zrx1200
    wish i had the smarts to help .seems the others have the jump .least when you guys get it done it will be right..question is will we be able to upgrade our ls1 system to ls2using the same cable at reas cost?? or will we be starting again..
    Updated hardware is required to support the CAN protocol used by the LS2.
    Upgrade from LS1 hardware to LS2 hardware will be reasonable - similar type of deal as upgrading from EFILive V6 Scan Tool to EFILive FlashScan.
    No existing EFILive customer will have to "start again".

    Regards
    Paul

Similar Threads

  1. Flash Scan V2 problems
    By loafycleetus in forum FlashScan V2
    Replies: 4
    Last Post: April 20th, 2009, 01:51 AM
  2. Support for '06 LBZ with new dealer flash?
    By Boost in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 8
    Last Post: February 16th, 2009, 12:57 AM
  3. Where is Flash Scan update 2.04.57?
    By Spindoctor in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: February 6th, 2008, 12:49 PM
  4. Neat flash scan tip
    By Dirk Diggler in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: February 26th, 2005, 04:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •