I'm having some problems getting my new setup to work. Will this program scan and record while starting so that I can post the recording and get help?
I'm having some problems getting my new setup to work. Will this program scan and record while starting so that I can post the recording and get help?
11 Silverado
08 Sierra
91 RS with 350 TPI and 411 ECM
Yes... key on, connect to vehicle, enter PCM type, enter VIN/OS, select pids, goto dash page (gauges or charts), press red button to start recording, key start.
Thanks for response
I havent scanned with this program before, what are PIDS? I am use to turnerprort on OBD1 system.
11 Silverado
08 Sierra
91 RS with 350 TPI and 411 ECM
PID's are the same as OBD-I parameters that you can log/view.
After connecting to vehicle, press the Validate PIDs button;
then go to the PIDs F8 tab, and double click on the ones that you want to log.
I figured it out. Thanks
PIDS=Points of Intrest in my lingo.
11 Silverado
08 Sierra
91 RS with 350 TPI and 411 ECM