We install this in the map folder?
What is it?
We install this in the map folder?
What is it?
2003 red vert
Mods:
LS7 crate engine, wet sump, 24xx reluctor
LPE 100mm MAF
Vararam, cold air intake and bridge
RPM Level 6/4L60e trans
3.42 gears
Yank SS3600
1-7/8" AR headers
Z06 exhaust
470rwhp 437rwtq
1/8th mi-1.526-60'-6.862-1/8th-@100.74mph
It is in mine-
Last edited by Bruce Melton; November 13th, 2007 at 02:51 PM.
2000 C5 Coupe, 6M, Callies/Mahle stroked LS7 (441), Blackwing, Halltech, LS3 intake, 90mm Shaner TB, ported L92 heads, FAST 50# inj, not too much cam, Kooks 1 7/8" headers , 3" catless mid pipes, Z TIs, track suspension, , 3:90 rear, EFI V2, LM-2, etc.
PowrMax Performance
100 mm PowrMAF
LM-2 EFILIve package with TAQ -sLM2 V-2 serial cable> Package deals
It's in todays update 24 zip. The path is Maps.Originally Posted by Bruce Melton
2003 red vert
Mods:
LS7 crate engine, wet sump, 24xx reluctor
LPE 100mm MAF
Vararam, cold air intake and bridge
RPM Level 6/4L60e trans
3.42 gears
Yank SS3600
1-7/8" AR headers
Z06 exhaust
470rwhp 437rwtq
1/8th mi-1.526-60'-6.862-1/8th-@100.74mph
From the ReadMe.rtf file:
ยท To automatically load pre-selected scan tool maps when a new *.pid file is selected, create a *.mls (map list) file in the Maps folder. For example create a file called Default Metric.mls to have the maps specified in that file loaded automatically when the Default Metric.pid file is loaded.
File format:
[Maps]
MapA=name_of_map_A.map
MapB=name_of_map_B.map
MapC=name_of_map_C.map
etc...
I think the Example.mls is that, but I can't get it to open, yet.
Ive opened it but I haven't got it to work yet.
This file is used to specify which *.map file should be loaded into the
; scan tool when loading a *.pid file with a name that matches this file.
;
; I.e. if you open a pid file called: "Default Imperial.pid", then create
; a matching "Default Imperial.mls" file in the maps folder. All the map
; filenames listed in that file will be automatically loaded.
;
; The file format is:
; [Maps]
; MapA=filename_of_map_A
; MapB=filename_of_map_B
; MapC=filename_of_map_C
; ect...
; you can include all maps or only as many maps as you want loaded.
;
; Example file:, called "Default Metric.mls":
; [Maps]
; MapA={B5913_5914} High_Low Timing Table - Total Spark Advance (MAF).map
; MapB={B5001} MAF Calibration Table - LC-1 Wideband AFR.map
[Maps]
MapA={B5913_5914} High_Low Timing Table - Total Spark Advance (MAF).map
MapB={B5001} MAF Calibration Table - LC-1 Wideband AFR.map
856RWHP 408 Supercharged LS1 Holden Commodore.
The file called Example.mls is just an example. To make it functional, you need to rename it to the same name as a *.pid file.
i.e. if you have a pid file called Default Metric.pid then rename the Example.mls file (or copy it) to Default Metric.mls. Then when you open the Default Metric.pid file, the maps listed in Default Metric.mls will automatically be opened in the [Maps (F10)] tab page.
You can set up a matching *.mls file for each of your *.pid files if you want to.
Thanks to chuck Mosello - (Corvette Doctor) for hassling me to include this new feature.
Regards
Paul
Before asking for help, please read this.
That's just insane - and makes lots of smoke tooOriginally Posted by VT LS1 NZ
Before asking for help, please read this.
Aw shucks..It wasn't nuthin'! See what Paul will do for you when you send him 64 e-mails per day, 14 PMs, and spend 4 ENTIRE DAYS with him at SEMA!Originally Posted by Blacky
Thanks PAUL!
Chuck CoW
CoW BOOSTER! Electronic Throttle Enhancement.
- CLICK HERE NOW FOR MORE INFORMATION! -
VARARAM, EDELBROCK, AMERICAN RACING HEADERS, BAER BRAKES, BORLA, EFI Live, Magnuson,
COMP Cams, PROCHARGER, PRO TORQUE, PHADT Racing, INNOVATORS WEST, and more.