Issues with 7.51

[VT LS1 NZ]

Any one else having issues with 7.51.

*Everytime I go to start the car while logging my speedo jumps to about 45 km then when it starts it stays at 243km .

*Also I get a bogus DTC P0000 come up.
If I look at it via V2 its not there but on the laptop it is.

Ive downloaded and reinstalled in fact Ive used a different laptop.
No problems if I go back to V7.42(533)

*Also did anyone get the maps to Automatically load using *.mls

[Chevy366]

Any one else having issues with 7.51.

*Everytime I go to start the car while logging my speedo jumps to about 45 km then when it starts it stays at 243km .

*Also I get a bogus DTC P0000 come up.
If I look at it via V2 its not there but on the laptop it is.

Ive downloaded and reinstalled in fact Ive used a different laptop.
No problems if I go back to V7.42(533)

*Also did anyone get the maps to Automatically load using *.mls

Don't have a issue with Scan Tool that I have seen , but do get the False P0000 codes .
I had the 7.5.1 build (21) and it worked great , so did not think twice about updating to 7.5.1 build (24) .
joecar answered me with in a post with the topic "Reset DTCs" have a look .
http://forum.efilive.com/showthread.php?t=6654

[stigmundfreud]

are you on about the actual car speedo? If so its a common problem on the UK Monaros on both ls1 and ls2's - seems a problem with the unit which can be, after much arguing, changed on warranty.

I've been sat still doing 220mph. It appears a few restarts cures it and the problem doesnt appear for months, very random and rare.


OF course you can ignore that if you are on about te scan tool reporting incorrect speed

[VT LS1 NZ]

are you on about the actual car speedo? If so its a common problem on the UK Monaros on both ls1 and ls2's - seems a problem with the unit which can be, after much arguing, changed on warranty.

I've been sat still doing 220mph. It appears a few restarts cures it and the problem doesnt appear for months, very random and rare.


OF course you can ignore that if you are on about te scan tool reporting incorrect speed

No its the Scan tool but thanks for your input.The scan tool speedo will jump to 45km while cranking then once started jumps to a high value .
Normally I'm able to work most things out before posting.
It happening on two laptops using the last two releases.
Ive prove it to EFILive_Scan.exe & obdiiV7.dll files.
Ive gone back to 7.4

[joecar]

I'm not able to get the *.mls map-autoload thingo to work...

[Bruce Melton]

I have the 36-38 MPH speedo problem with LS1 OS.

[hquick]

I get the P0000 codes also.

[joecar]

I get the P0000 codes also.

Paul's on it: showthread.php?p=58313#post58313

[hquick]

Yeah...found that thread. Thanks Joe.

[DrX]

Any fix for this yet as it has my airbags disabled? Don't even have any SI Sensors on my truck.