BB Logging update Nov 28, 2007

[Blacky]

Download these two files:

http://download2.efilive.com/Softwar...751_026_68.zip
and
http://download2.efilive.com/Softwar...811_009_09.zip

Same instructions as the original downloads here:
http://forum.efilive.com/showthread.php?t=6724

Regards
Paul

[Hyper99]

So far so good - Updated fine.

I like the memory selection feature.

Will try it in the truck in the morning

[SV8346]

i cant get it to go into deadpoll mode, when i hold down the control button and plug it in i get the 2 amber flashing lights back and forward but when i go to check status in the firmware upgrade it says its not in deadpoll mode????





HELP.......

[JezzaB]

Still cant get it to read the PCM. Same as before, unlocks the PCM and gets ready to read etc and then just sits there waiting and waiting with the occasional spurt in activity on the lights.

Then when i retried the operation it informed me the PCM was locked. Removed the cable, restarted car. Same. Restarted EFILive Tune Tool. Still the same, says its locked. Restarted the computer and it wouldnt say it was locked anymore but still cant read the PCM. This was on an E38 again, dont have an LS1 to try it on tonight.

Jez

[SV8346]

has anyone had this problem before, nothing i can do can get it to go into dead poll mode.

[NERDPWR]

Upgraded to the new firmware without issue.. Went for a drive Logged some data.. At this stage all seems good..

BTW 433 / 05 VZ.

[XLR8NSS]

i cant get it to go into deadpoll mode, when i hold down the control button and plug it in i get the 2 amber flashing lights back and forward but when i go to check status in the firmware upgrade it says its not in deadpoll mode????





HELP.......

Exact same thing here. I will check back in this afternoon.

Thanks

[NERDPWR]

Exact same thing here. I will check back in this afternoon.

Thanks

You will need to go straight into EFILive Explorer and update the firmware straight to 2.5.09 using the firmware tab if you have already been through the previous beta firmware upgrade....

[SV8346]

yep same, upgraded....thanks to NERDPWR. Went for a drive and done a short log all seems good. Will be even better once more pids are available.

Awesome work blacky!!!

[Cougar281]

Maybe I'm doing something wrong, but I'm still not getting any data in standalone. The timer increments, but no frames are logged and no data is displayed next to the PIDs. After teh update, I formatted the config flash and copied all the PMM files and the options.ini back.

Also, still getting the $0311 when I try to clear DTCs on my LLY.