BB Logging update Nov 28, 2007

[Hyper99]

Success! Logged both to internal memory and SD card.

In the Config.INI file I see where the PIDS are defined as to which ones to log.

PCM, ECT, 0:110:1:1:0
PCM, MAP
PCM, RPM, 0:6500:2:1:0
PCM, VSS
PCM, SPARKADV
PCM, IAT
PCM, TP
PCM, SHRTFT1
PCM, LONGFT1
PCM, SHRTFT2
PCM, LONGFT2
PCM, KR, 0:0:3:1:5
PCM, HO2S11
PCM, HO2S21
PCM, IBPW1
PCM, IBPW2
PCM, TOS
PCM, GEAR

What other PIDS are usable?

[Blacky]

Maybe I'm doing something wrong, but I'm still not getting any data in standalone. The timer increments, but no frames are logged and no data is displayed next to the PIDs. After teh update, I formatted the config flash and copied all the PMM files and the options.ini back.

Also, still getting the $0311 when I try to clear DTCs on my LLY.

Can you clear codes and log data using a laptop in passthrough mode?
If so, can you please connect up FlashScan to your laptop and LLY and click on the connect button, then clear codes, then log about 10 seconds of data. Stop logging and select File->Generate error report. Save the report and email it to me at paul@efilive.com.

Regards
Paul

[Blacky]

Success! Logged both to internal memory and SD card.

In the Config.INI file I see where the PIDS are defined as to which ones to log.

PCM, ECT, 0:110:1:1:0
PCM, MAP
PCM, RPM, 0:6500:2:1:0
PCM, VSS
PCM, SPARKADV
PCM, IAT
PCM, TP
PCM, SHRTFT1
PCM, LONGFT1
PCM, SHRTFT2
PCM, LONGFT2
PCM, KR, 0:0:3:1:5
PCM, HO2S11
PCM, HO2S21
PCM, IBPW1
PCM, IBPW2
PCM, TOS
PCM, GEAR

What other PIDS are usable?

The available PIDs are listed in the *.txt files in the Pid Descriptions folder. Read the Readme.txt file in that folder for more info.

The PIDs currently available are only about 20% of what is available in total. We will add in the rest once everything is working properly.

Regards
Paul

[Blacky]

Maybe I'm doing something wrong, but I'm still not getting any data in standalone. The timer increments, but no frames are logged and no data is displayed next to the PIDs. After teh update, I formatted the config flash and copied all the PMM files and the options.ini back.

Also, still getting the $0311 when I try to clear DTCs on my LLY.

Just re-checked the LLY and found similar problems. I think its just a configuration problem. Working on a fix now...

Regards
Paul

[Happy Jim]

I was typing a message about my problems updating the firmware...however all now sorted.

Whilst typing my message I ran EFILive Explorer so that I could transcribe what I was doing accuratly.....HA! it wouldn't let me type in this window while it was running (XP running dual screens), I could click the browser window and transfer focus, scroll up and down OK, just couldn't type.

Not an issue for me in anyway, just thought you might like to know.

Jim

[Blacky]

I was typing a message about my problems updating the firmware...however all now sorted.

Whilst typing my message I ran EFILive Explorer so that I could transcribe what I was doing accuratly.....HA! it wouldn't let me type in this window while it was running (XP running dual screens), I could click the browser window and transfer focus, scroll up and down OK, just couldn't type.

Not an issue for me in anyway, just thought you might like to know.

Jim

Got a USB keyboard? Sometimes my keyboard stops working (on Vista), I just unplug - replug it and it is all good again. Not sure what is causing it. It only fails when I have another USB device plugged in to the socket next to it - i.e. on the same hub.

Regards
Paul

[Wasted Income]

I updated to the newest firmware, but do I have to re-update the bootblock with today's update?

[Blacky]

I updated to the newest firmware, but do I have to re-update the bootblock with today's update?

No, the bootblock update is only required to be done once.

Actually you can't do the boot blockupgrade again because the option to upgrade the bootblock is only in the old 2.4 firmware. Now that you have updated to the 2.5 firmware you can just run the EFILive_Explorer program and use the firmware programming option in there. You also don't need to do the "hold down the Ctrl key" thing anymore either when programming the firmware.

Regards
Paul

[Wasted Income]

Thanks Paul! Just went out and tested it out. Works great on my LSx, does not work on my LLY.

[Happy Jim]

Got a USB keyboard? Sometimes my keyboard stops working (on Vista), I just unplug - replug it and it is all good again. Not sure what is causing it. It only fails when I have another USB device plugged in to the socket next to it - i.e. on the same hub.

Regards
Paul

Keyboard is fine, while I've got the "Reply to Thread" window open (ie I'm in the middle of replying to a post) if EFI Explorer is running I can't type in the "Reply to Thread" window - I can click into it and get the flashing curser...just can't type anything. As soon as I close EFI Explorer all is fine again (I'm on IE6 if the browser has anything to do with it).

No biggie though

Cheers

Jim