Page 5 for the cos#5...
on a side note...i wonder if running OLSD on the cos#5 could be tweaked alittle using the autoVE methods to fine tune the dry shots even closer???
Page 5 for the cos#5...
on a side note...i wonder if running OLSD on the cos#5 could be tweaked alittle using the autoVE methods to fine tune the dry shots even closer???
Last edited by brokenfly; October 21st, 2008 at 11:21 AM.
2004 A4 GTO OLSD 6.75@102.32mph 1/8th mile...
http://www.youtube.com/watch?v=IB9sJ_W6QDY
LS6 Factory Heads,Cam,Stall,N2O...
You could with a custom calculated pid. For instance if you are running 12.5 to 1 commanded afr, but you want 11.3 to 1 afr while spraying obviously the standard BEN pid wont work. So you would need to make a pid something like
calc.afr/commanded.afr-offset. In this case the offset would be 1.2.
The Tremor at AIR
what ever happened to this?
Or is doing a conversion to the 512kb better?
"All that is needed for the triumph of evil is that good men do nothing..."
Man... i so want this BAADD... E85 plus nitrous would be killer.
"All that is needed for the triumph of evil is that good men do nothing..."
Who is still interested in this?
"All that is needed for the triumph of evil is that good men do nothing..."