Results 1 to 7 of 7

Thread: Rev limiter help

  1. #1
    New Member
    Join Date
    Oct 2007
    Posts
    4

    Default Rev limiter help

    I have a 00' TA that use to have an A4 that I have swapped over to a th400, so non of the factory tranny electronics are plugged in. I have turned all the rev limiters and the fuel cutoff up to 7500rpm, but I still seem to have a rev limiter @6500(I think the actual scan said 6638 or something) I do not seem to have this problem in the burnout. Truthfully it only seems to be on the 1-2 shift. but I think after it hits the limiter I shift the 2-3 early. so maybe itsanytime going down the track. Anyway, I can not seem to find anything. is there a speed limiter or something I'm overlooking? A buddy of mine never had this problem but he had swapped from a 6spd. so I was thinking maybe it had something to do with the A4 computer. please help!

  2. #2
    Lifetime Member
    Join Date
    Jun 2007
    Posts
    203

    Default

    Did you change the Abuse Management parameters?

  3. #3
    New Member
    Join Date
    Oct 2007
    Posts
    4

    Default

    I will check it. thanks.

  4. #4
    New Member
    Join Date
    Oct 2007
    Posts
    4

    Default

    Quote Originally Posted by SOMhaveit
    Did you change the Abuse Management parameters?

    yes it was changed. it is something else I'm overlooking.

  5. #5
    Junior Member
    Join Date
    Sep 2003
    Posts
    49

    Default

    Quote Originally Posted by Badmire68
    yes it was changed. it is something else I'm overlooking.
    Are you using the A4 .tune or did you change to a M6 tune file?
    I'm old and Retired! I used to go fast. I don't go so fast anymore ...but, my cars still do!

  6. #6
    Lifetime Member
    Join Date
    Aug 2006
    Posts
    412

    Default

    I have seen the same conditions discussed on other forums, and the general consensus is to start with a manual tune.
    Last edited by Lextech; January 17th, 2008 at 09:56 AM.
    98 GMC RCSB 2WD, Internally stock 305 w/Twin T-3 junkyard Turbos,4L80e,Ramjet intake,42lb.inj., 0411PCM, COS3,4675LBS w/me in it. Best Time on 5 passes-13.01@110

  7. #7
    New Member
    Join Date
    Oct 2007
    Posts
    4

    Default

    I'm using an a4 tune file. maybe that is it.

Similar Threads

  1. 97 C5 Rev Limiter ?
    By Kool C5 in forum General (Petrol, Gas, Ethanol)
    Replies: 12
    Last Post: September 11th, 2007, 11:28 AM
  2. rev limiter
    By CWR in forum Vortec V6/V8 Specific
    Replies: 11
    Last Post: July 4th, 2007, 04:40 PM
  3. '98 LS1 Rev Limiter...
    By TNTFEDZ in forum Gen III V8 Specific
    Replies: 10
    Last Post: May 12th, 2007, 10:48 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •