Results 1 to 2 of 2

Thread: wait4me

  1. #1
    Junior Member
    Join Date
    Jan 2008
    Posts
    25

    Default wait4me

    Jesse, here's a short run with Baro, O2 voltage, KR and a few other PIDs.
    Like I said on the phone, the car is running very well.

    As you can see Baro is 25.5. I don't know what sea level typically is?

    Thanks for all the help
    Attached Files Attached Files

  2. #2
    Junior Member
    Join Date
    Jan 2008
    Posts
    25

    Default

    What is a normal barometric reading for seal level 72F?

    Also, if anyone wants to see something interesting...here's my high idle problem and the reason I bought EFILive. Under certain conditions the car acts like it has a major vacuum leak. It seems to be triggered by the AC, but not exactly tied to it.

    What happens is, I start to drive away and the idle will run up to 22ooRPM or 3300-3500 depending on the clutch being engaged. It will idle at like that with 0%TP until I either go 100% throttle until about 5,000RPM and let off. Here's a couple logs with all IAC PIDs on...it's too many channels, but I don't know which IAC I can turn off?
    Attached Files Attached Files

Similar Threads

  1. Happy Birthday wait4me (yesterday)...
    By joecar in forum Lounge
    Replies: 6
    Last Post: November 19th, 2008, 11:19 AM
  2. WAIT4ME Check PM's
    By Qpred98 in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: July 27th, 2005, 02:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •