Raodrunner Option Requests:

[mr.prick]

i would like the option of selecting how data is applied.
right now the only way is to multiply,
which is really only good for BEN factor.
the option to add, subtract, and multiply can
be added to the RTACS tab for convenience.
also a way to combine filters.(RPM and TPS) ect.
hopefully more people can add to this thread.

[Chuck CoW]

i would like the option of selecting how data is applied.
right now the only way is to multiply,
which is really only good for BEN factor.
the option to add, subtract, and multiply can
be added to the RTACS tab for convenience.
also a way to combine filters.(RPM and TPS) ect.
hopefully more people can add to this thread.

Yeah...Good idea!

Chuck CoW

[hquick]

I'd like to be able to AutoVE my main and Boost VE tables at the same time.

[Chuck CoW]

Go here.....

http://forum.efilive.com/showthread....ight=chuck+cow


Anyone have a use for this feature....I would love to see it....

Chuck CoW

[5.7ute]

Go here.....

http://forum.efilive.com/showthread....ight=chuck+cow


Anyone have a use for this feature....I would love to see it....

Chuck CoW

It wont allow me to view that post, must be a secret area

[hquick]

Me either

[TAQuickness]

Correct. It's in one of the beta areas.

[Chuck CoW]

It wont allow me to view that post, must be a secret area

Here you go.....

OH, How I love RTACS! Let me count the ways.....

Bottom line is...IT'S AWESOME!

However, I have two suggestions....

1) When RTACS is on and making changes...I would like to be able to copy and paste un-cooperative sections of the BEN table to the VE table while it's adjusting.....When RTACS is ACTIVE, highlighting and copying is not possible....

2) And, in a similar, and slightly related question.... One thing I've been waiting for/wanting is that while RTACS on, I'd like to have sort of a "FLASH" button or hot-key which would enable me to make quick changes to the VE to bring it closer much quicker.

While logging I've noticed the stray cells that don't get hit too often and some of the annoying DECEL and below 1200 rpm cells get messy....While I'm aware that you can block them out, I think there would be tremendous value in the "FLASH VE" button....

The "FLASH VE BUTTON" could be a hot key that would instantly take the BEN FACTOR table and "paste and multiply" it over the VE table so as to make initial dial in quicker....

If most of your cells are looking good and close to "1" then no problem, but if you have annoying strays that you don't hit often enough...you would be able to tame them much quicker, rather than waiting for RTACS to get around to adjusting them.

Problem is that RTACSing a vehicle on the street, or worse yet in an automatic, it can get tough to dial in those messy areas.

I believe that these ideas would make it a much quicker process....

While driving and RTACSing...I find myself often dreaming of reaching over and hitting the "FLASH VE BUTTON" to make things go quicker....

Then "SNAP" I wake up and realize that it's only a dream....and it dosen't exist yet.....

Hey Paul....Think it's do-able?

Chuck CoW

[mr.prick]

Here you go.....

OH, How I love RTACS! Let me count the ways.....

Bottom line is...IT'S AWESOME!

However, I have two suggestions....

1) When RTACS is on and making changes...I would like to be able to copy and paste un-cooperative sections of the BEN table to the VE table while it's adjusting.....When RTACS is ACTIVE, highlighting and copying is not possible....

2) And, in a similar, and slightly related question.... One thing I've been waiting for/wanting is that while RTACS on, I'd like to have sort of a "FLASH" button or hot-key which would enable me to make quick changes to the VE to bring it closer much quicker.

While logging I've noticed the stray cells that don't get hit too often and some of the annoying DECEL and below 1200 rpm cells get messy....While I'm aware that you can block them out, I think there would be tremendous value in the "FLASH VE" button....

The "FLASH VE BUTTON" could be a hot key that would instantly take the BEN FACTOR table and "paste and multiply" it over the VE table so as to make initial dial in quicker....

If most of your cells are looking good and close to "1" then no problem, but if you have annoying strays that you don't hit often enough...you would be able to tame them much quicker, rather than waiting for RTACS to get around to adjusting them.

Problem is that RTACSing a vehicle on the street, or worse yet in an automatic, it can get tough to dial in those messy areas.

I believe that these ideas would make it a much quicker process....

While driving and RTACSing...I find myself often dreaming of reaching over and hitting the "FLASH VE BUTTON" to make things go quicker....

Then "SNAP" I wake up and realize that it's only a dream....and it dosen't exist yet.....

Hey Paul....Think it's do-able?

Chuck CoW

have you tried lowering the update frequency in the properties tab,
and changing how much of a percentage the RR updates?