Results 1 to 5 of 5

Thread: Cannot get scan tool and tune tool linked for cell tracking

  1. #1
    Member
    Join Date
    Apr 2006
    Posts
    53

    Default Cannot get scan tool and tune tool linked for cell tracking

    I am having a problem not being able to link my tune tool to scan tool to track cells after logging. I have used this before when I had my 03 LB7, but have not been able to get it straight on my LMM. Any suggestions?

  2. #2
    Lifetime Member
    Join Date
    Feb 2007
    Posts
    514

    Default

    Which tables aren't following?

  3. #3
    Member
    Join Date
    Apr 2006
    Posts
    53

    Default

    None of the tables would follow, I loaded a new CAL_LINK file from a member on dieselplace.com and it links together right, except now SAE.TP (throttle position) constantly reads 14.1% regardless of actual position

  4. #4
    Lifetime Member
    Join Date
    Feb 2007
    Posts
    514

    Default

    Does throttle position log correctly? If so make sure that the PID that is being refference in the tune is the same as the one in your log. If it isn't you will need to go into the cal_link file and manually change it to the correct one.

  5. #5
    Member
    Join Date
    Apr 2006
    Posts
    53

    Default

    Yeah, I switched out SAE.TP for GM.APP in the CAL_LINK and everything is good

Similar Threads

  1. Can the scan tool be upgraded to tune?
    By Spdfrk1990 in forum General
    Replies: 2
    Last Post: May 1st, 2009, 03:32 AM
  2. Tuning tool not following scan tool (VE table)
    By dvx in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: October 19th, 2008, 08:43 AM
  3. Scan tool match tune tool?
    By zapp168 in forum Gen III V8 Specific
    Replies: 4
    Last Post: March 20th, 2008, 04:27 AM
  4. Fit to Scan Tool/Tune Tool
    By limited cv8r in forum General
    Replies: 11
    Last Post: March 3rd, 2007, 05:10 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •