Results 1 to 3 of 3

Thread: How-to after major engine upgrade?

  1. #1
    Lifetime Member Garry's Avatar
    Join Date
    Jun 2006
    Posts
    649

    Question How-to after major engine upgrade?

    OK, I expect to get back from vacation to my freshly upgraded Firehawk ... It had been stock, apart from running on COS#5 with SD ... see below for list of upgrades ...

    Anyway, what's the best way to get started with re-tuning the PCM? I've checked the available tunes, but none seems to be anywhere close to my setup, apart from the fact that those are mostly standard PCM OS, not COS5 ...
    Garry Glendown * '17 Fifty 2SS MT * 99 Firehawk Convertible (for sale)

  2. #2
    Lifetime Member TAQuickness's Avatar
    Join Date
    Jan 2005
    Posts
    2,940

    Default

    Start with the AutoVE, but in your case I'd use a 7-10% across the board rather than 15%. Once your air mass model is complete, you can go after the MAF and spark


  3. #3
    Lifetime Member Garry's Avatar
    Join Date
    Jun 2006
    Posts
    649

    Default

    OK, will take it slow, go 10 to start with in lower RPM ranges first and see how the car reacts. Hope it's finished anyway, should now tomorrow morning ...
    Garry Glendown * '17 Fifty 2SS MT * 99 Firehawk Convertible (for sale)

Similar Threads

  1. 2007 6.0 Missed Something Major Here
    By Big D in forum E37, E38 & E67 PFI ECM's
    Replies: 8
    Last Post: May 6th, 2009, 03:29 PM
  2. Need help with a major issue / Cry for help!!!
    By Rausche in forum Gen III V8 Specific
    Replies: 8
    Last Post: June 28th, 2008, 01:31 PM
  3. major problem with logging (can't do it)
    By tgeers in forum Black Box Logging
    Replies: 4
    Last Post: May 18th, 2006, 01:48 PM
  4. I need major LC1 hookup help!
    By Chris81 in forum General
    Replies: 15
    Last Post: September 25th, 2005, 05:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •