Results 1 to 6 of 6

Thread: high speed scaning

  1. #1
    Lifetime Member
    Join Date
    Jul 2005
    Posts
    702

    Default high speed scaning

    Did anyone try the full CANbus speed scanning? I think it's a brand new thing in 7.5.3. I don't have a E40 vehicle to try it on, but I could really use the higher resolution for an experiment I'm running.

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    We are improving the CAN speeds for each major release, however, it's still not as fast as it could be on the E38 for example. Well, I should say, it's fast as it can be, but the channel limits still apply.

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Lifetime Member
    Join Date
    Jul 2005
    Posts
    702

    Default

    so where's the bottleneck? which channels are you talking about?

  4. #4
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Software is the bottleneck, not the hardware. 24 channels or more slows the E38 down (in the software). The number of channels can be monitored down the bottom in the PID selection.

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  5. #5
    Lifetime Member Bruce Melton's Avatar
    Join Date
    Oct 2003
    Posts
    674

    Default

    And the E-38 scanning is megafast compared to previous. Is this a lag issue?

    2000 C5 Coupe, 6M, Callies/Mahle stroked LS7 (441), Blackwing, Halltech, LS3 intake, 90mm Shaner TB, ported L92 heads, FAST 50# inj, not too much cam, Kooks 1 7/8" headers , 3" catless mid pipes, Z TIs, track suspension, , 3:90 rear, EFI V2, LM-2, etc.
    PowrMax Performance

    100 mm PowrMAF

    LM-2 EFILIve package with TAQ -sLM2 V-2 serial cable> Package deals

  6. #6
    Lifetime Member TAQuickness's Avatar
    Join Date
    Jan 2005
    Posts
    2,940

    Default

    I like that avatar Bruce - !hijack


Similar Threads

  1. 6th getting locked out at high speed!
    By trailermasher in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 48
    Last Post: August 20th, 2022, 12:19 PM
  2. High speed onboard datalogging
    By limited cv8r in forum RoadRunner Real-Time PCM Emulator
    Replies: 19
    Last Post: September 14th, 2012, 03:35 PM
  3. High Idle speed after driving
    By Thumper in forum Gen III V8 Specific
    Replies: 6
    Last Post: February 22nd, 2008, 12:44 PM
  4. high speed flash
    By minytrker in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: May 16th, 2007, 01:13 PM
  5. Use high speed
    By minytrker in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: July 6th, 2006, 01:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •