Idles fine after loading new tune. Drive it goes to crap

[Dale]

Still working on idle issues here I can load a new tune file. Do some idle learns, reload, etc etc.

Idles great after I load in my tune files. But after I drive it say 20 miles or so, it goes to crap. Let it cool all the way off, start and it wont idle. WTF?

my refaig is around -.15 or so(after loading new tune). Is that close enough? Or is that still to far off.

What else could it be?

[eurospec1]

Still working on idle issues here I can load a new tune file. Do some idle learns, reload, etc etc.

Idles great after I load in my tune files. But after I drive it say 20 miles or so, it goes to crap. Let it cool all the way off, start and it wont idle. WTF?

my refaig is around -.15 or so(after loading new tune). Is that close enough? Or is that still to far off.

What else could it be?

try turning idle learning off and see what happens?

[Dale]

try turning idle learning off and see what happens?

Where is that at? (dont have efi in front of me at moment)

[Dale]

Ok, I assume you were talking about B4501 and B4502. I moved both of them up to 130.

Loaded
Started, did a refaig process. Showed I needed to add .07 lbs about everywhere but edited nothing.

Drove over to gas station (about 3 miles away) and drove fine.
Turned off for gas
Started back up, stalled. Start, stall. I drove thru neighborhood on way back and stalled everywhere.

Once I got it in the garage I somehow managed to bring it down slow and it showed I needed .50lb at idle.

Why the difference?