DMA pids for E38 auto VE

[hymey]

Hi guys I tried to log today with e38 Direct Memory Access pids. I was unable to select them as valid. The one in particular i want is the commanded fuel e38 dma pid. It just has a red cross through it and won't become valid.

Any ideas?

Thanks

Joel

[oztracktuning]

Connect to car and tell it to validate pids again.

[GMPX]

Joel, DMA PID's are something we need to update often as new OS's come out, depending on the version software you are running and the Operatin system in the ECM the DMA PID's might not be defined.

If what 'oztracktuning' suggested fails then let us know the ECM OS and software version you are running.

Cheers,
Ross

[hymey]

I am using V7.5.3 latest operating system. Latest drivers. Latest BB logging firmware(beta). I suspected it may of had something to do with the BBL firmware for the beta testing but Blacky said it should work.

My pcm is E38. I unable to do a mafless tune until they are validated. Connected to the vehicle I cannot validate any e38 dma.

[GMPX]

Ah, I meant the OS on the ECM, not the PC, sorry.

Cheers,
Ross

[hymey]

operating system BCC YPRS

12619078.

Hope this helps.

Joel

[GMPX]

That is quite odd because that ECM OS certainly has DMA PID's defined in the latest release.
Are 'any' of the DMA PID's available or all they all blocked?

Cheers,
Ross

[hymey]

All E38 are invalid Ross. I have tried reinstalling the software and drivers. Tried numerous times to validate the pids. Is there any other pids I have to select to allow the e38 pids to be validated. It has got me stuffed mate.

[GMPX]

Shoot me a PM with your Email address and I'll send you the latest gm_enhanced file (which contains all the DMA data).

Cheers,
Ross

[hymey]

Hi Ross,
How did you go with that gm_enhance file.? I tried the last calibration files. Didn't help.

Cheers

Joel