BB Logging update (March 4th)

[Beer99C5]

For those of you wanting to get a jump start on the LC-1, LM-1 serial interface logging, you will need to construct a crossover cable that connects the Innovate serial cable to the FlashScan serial cable.

See attached image.

Regards
Paul

Any Limit to the length on the crossover cable? The serial connecter will not pass through the firewall gromment, I can pass the wires through the gromment, then attach the connector, probably be 2 meters long. Is 2 M OK for the serial port crossover?

[jay p]

How about a fix for the 6 speed Allison?

[Gelf VXR]

For those of you wanting to get a jump start on the LC-1, LM-1 serial interface logging, you will need to construct a crossover cable that connects the Innovate serial cable to the FlashScan serial cable.

See attached image.

Regards
Paul

Theres always one!! What if you are using two LC-1's? Can they be connected at the same time?

[Gelf VXR]

Theres always one!! What if you are using two LC-1's? Can they be connected at the same time?

They can be linked in series for the LC-1 software, but will efilive log both?

[Chevy366]

Oh God that is great , no more Analog inputs for the LC-1 !
I have one of the JAW's , Just another Wide-band (not assembled yet) , with a Serial out on it as well , wonder if it will work ?

[Ninety8C5]

For those of you wanting to get a jump start on the LC-1, LM-1 serial interface logging, you will need to construct a crossover cable that connects the Innovate serial cable to the FlashScan serial cable.

See attached image.

Regards
Paul

The female 9 pin connector I have has pin 1 where you have the ground connected. From what I found on the web, the male and female pin designations are reversed. i just want to be sure which way to wire the db-9 plug.

DB9 Male and Female

DB9: View looking into male connector

DB9: View looking into female connector

[Chevy366]

Does it matter which end connects to where , one end for LC-1 and other V2 ?

[Blacky]

Any Limit to the length on the crossover cable? The serial connecter will not pass through the firewall gromment, I can pass the wires through the gromment, then attach the connector, probably be 2 meters long. Is 2 M OK for the serial port crossover?

The cable can be 50 feet long, I think that should be enough

Regards
Paul

[Blacky]

How about a fix for the 6 speed Allison?

That's being worked on this Friday. I'm just waiting for the Allison test equipment to arrive. The Allison problem will be solved in this next beta release.

Regards
Paul

[Blacky]

They can be linked in series for the LC-1 software, but will efilive log both?

Yes, EFILive will log multiple* Innovate devices.

The initial relaese may only support one, but it has been set up to handle mutliple devices and the firmware will eventually support more than one.

*Limited to four Wide band devices.


Regards
Paul