Can't RAFIG
Ok this one has got me stumped. Tried to do a RAFIG the other day due to opening up my TB hole. Used my normal PID list for doing RAFIG, but no data was coming out. Tried it again a day later no good. Spoke to a mate and he hasn't seen the issue but he sent me his RAFIG PID list to try.. Same deal, no data.
I've attached a Log I just did using my mates PID list.
Any idea's guru's.. I've never had an issue doing the RAFIG process until this latest update for which I'm using now.
Macca, did you have the calc pid and it's underlying pids all selected...?
Joe as can be seen in the log. They are all there.Originally Posted by joecar
In maps tab you have cell count's so its scaning , looking at your log under data tab the iac trims are 0 , so i say your tune does not trim the idle air TPS is .4
post up your tune file
The tune is set to idle trim. It has not changed in that regard ever. The problem has only come about since going to this new update I rekon as I did a RAFIG only 2 months ago when I fitted my car.
Sorry for suggesting some thing to try , was just trying to help you out
I appreciate the suggestion.. Just letting you know thats not what it is.
you talk about running the latest update ,what number do you call the latest .
7.5.3 Build 36.
On a side note you did get me thinking to compare my current tune to one I knew I could RAFIG. There are a couple of tables that have poped up that I have only started using in the last few weeks.. In theory they should be unrelated but I'll revert back and try again. If it fixes it I'll report back on exactly which table it is when I work it out.
I have 7.5.3 .36 running on one of my laptops & have done RAFIG
Posting Permissions
Reply With Quote