Page 10 of 17 FirstFirst ... 89101112 ... LastLast
Results 91 to 100 of 167

Thread: Auto Tuning - Step-by-Step

  1. #91
    Junior Member
    Join Date
    Jan 2005
    Posts
    38

    Default

    Quote Originally Posted by TAQuickness
    could always hang the MAF on your garage wall as a decoration
    That's all well and good but what to do come emissions time here in Georgia? I don't think a MAFless C5 designed to run a MAF will pass.

  2. #92
    Lifetime Member BowlingSS's Avatar
    Join Date
    Nov 2003
    Posts
    607

    Default

    Quote Originally Posted by Patches
    Quote Originally Posted by TAQuickness
    could always hang the MAF on your garage wall as a decoration
    That's all well and good but what to do come emissions time here in Georgia? I don't think a MAFless C5 designed to run a MAF will pass.
    It might pass as long as you do not have any codes.

    Bill
    2011 Camaro 2SS/RS L99 RJT
    CAI, Inc. Cold Air Induction;ADM Scoop
    Rx Catch Can;Rx Breather;Roto-Fab Washer Container
    VMax Ported RJT Throttle Body
    XSPower Headers and XSPower 3" Exhaust System
    Elite Engineering Tunnel Brace,
    Gorilla Wheel Lock System;
    Tinted Windows 35%;EFILive Tune

  3. #93
    Lifetime Member TAQuickness's Avatar
    Join Date
    Jan 2005
    Posts
    2,940

    Default

    Quote Originally Posted by Patches
    Quote Originally Posted by TAQuickness
    could always hang the MAF on your garage wall as a decoration
    That's all well and good but what to do come emissions time here in Georgia? I don't think a MAFless C5 designed to run a MAF will pass.
    Do you have to pass a visual inspection? If so that might be a problem. Otherwise, send me copy of your tune (TAQuickness@houstonr.rr.com).


  4. #94
    Lifetime Member TAQuickness's Avatar
    Join Date
    Jan 2005
    Posts
    2,940

    Default

    The latest verion of the AutoVE doc can be aquired here http://www.efilive.com/doc/index.html


  5. #95
    Lifetime Member BowlingSS's Avatar
    Join Date
    Nov 2003
    Posts
    607

    Default

    Quote Originally Posted by TAQuickness
    The latest verion of the AutoVE doc can be aquired here http://www.efilive.com/doc/index.html
    Nice format.

    Bill
    2011 Camaro 2SS/RS L99 RJT
    CAI, Inc. Cold Air Induction;ADM Scoop
    Rx Catch Can;Rx Breather;Roto-Fab Washer Container
    VMax Ported RJT Throttle Body
    XSPower Headers and XSPower 3" Exhaust System
    Elite Engineering Tunnel Brace,
    Gorilla Wheel Lock System;
    Tinted Windows 35%;EFILive Tune

  6. #96
    Lifetime Member BowlingSS's Avatar
    Join Date
    Nov 2003
    Posts
    607

    Default

    Quote Originally Posted by TAQuickness
    Quote Originally Posted by Patches
    Quote Originally Posted by TAQuickness
    could always hang the MAF on your garage wall as a decoration
    That's all well and good but what to do come emissions time here in Georgia? I don't think a MAFless C5 designed to run a MAF will pass.
    Do you have to pass a visual inspection? If so that might be a problem. Otherwise, send me copy of your tune (TAQuickness@houstonr.rr.com).
    GA does not have a visual inspection, just emissions.
    Bill
    2011 Camaro 2SS/RS L99 RJT
    CAI, Inc. Cold Air Induction;ADM Scoop
    Rx Catch Can;Rx Breather;Roto-Fab Washer Container
    VMax Ported RJT Throttle Body
    XSPower Headers and XSPower 3" Exhaust System
    Elite Engineering Tunnel Brace,
    Gorilla Wheel Lock System;
    Tinted Windows 35%;EFILive Tune

  7. #97
    Junior Member
    Join Date
    Jan 2005
    Posts
    38

    Default

    Correct - no visual. But they do the OBDII query and I would imagine a MAF shut off in the PCM would raise a flag on their computer. I have yet to hear from any MAFless owner in an OBDII emissions state claim to pass. I passed my normal emissions test last March but I need to know with sufficient time in case I need to pop the MAF back on and complete adequate driving cycles to satisfy the tester.

    TAQ, I'll send you a copy of my tune this morning. TIA.

    Btw, awesome AutoVE tutorial. The new format looks great. Thanks for taking the time to create that.

    Ed

  8. #98
    Lifetime Member TAQuickness's Avatar
    Join Date
    Jan 2005
    Posts
    2,940

    Default

    Gotta thank Blacky and GPMX - they took on the challenge of getting into the "Live" format!


  9. #99

    Default

    Quote Originally Posted by TAQuickness
    The latest verion of the AutoVE doc can be aquired here http://www.efilive.com/doc/index.html
    That looks good except when I print it (HP 4200dn), the top of every page is chopped. For example, on page 1 the top 25% of the header, "EFILive AutoVE Tutorial ..." is missing. I suspect there might have been a setup problem when the .doc was converted to pdf.

  10. #100
    Lifetime Member TAQuickness's Avatar
    Join Date
    Jan 2005
    Posts
    2,940

    Default

    hmmmm.... did you save the doc to your PC before you tried to print it?

    (just trying to duplicate the problem)


    Edit:
    I've tried a few different scenarios and couldn't duplicate the problem.

    Just to eliminate the obvious, are your margins set right? Papersize?


Page 10 of 17 FirstFirst ... 89101112 ... LastLast

Similar Threads

  1. ** Next Step? **
    By Nemo in forum Duramax LLY
    Replies: 1
    Last Post: February 15th, 2009, 05:56 PM
  2. BBL Step by Step Tutorial ?
    By JR-CRUZN-C5 in forum FlashScan V2 BB Logging
    Replies: 2
    Last Post: June 29th, 2008, 11:28 PM
  3. 2 step
    By minytrker in forum Custom Operating Systems
    Replies: 2
    Last Post: July 16th, 2007, 02:01 AM
  4. step by step torque managment,speed limiter,efan,engine torq
    By 5.3 in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: July 24th, 2005, 11:12 PM
  5. SD Step by Step
    By mistermike in forum General (Petrol, Gas, Ethanol)
    Replies: 17
    Last Post: June 28th, 2005, 03:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •