Originally Posted by
joecar
First, set these tables to in-range values (even if you don't use some of the features):
{A0007}
{A0008}
{A0009}
{A0010}
{A0013}
{A0014}
If any cells contain blue dog-ear corners when you first open the file, the those cells are out-of-range.
Then try doing a full-flash.
Also, fix the TPS wire, from what you said it seems to have an intermittent open (as you drive around, g-forces, vibration, heating/cooling will "wiggle" the wire).
Crank relearn primes the misfire detection algorithm... it won't hurt to redo the CRL.
Did you get the polarity of the CKP sensor wires correct...?
Did you get the polarity of the CMP sensor wires correct...?